Forum Replies Created

    #29159

    Hi Hoat Li,

    For the prices of Optiwave Corp, you have to see according to your country distributor or you can write directly to the Optiwave to know prices.

    #29117

    Dear Marvi Grovar,

    For your kind information, representative of Optiwave in India is GigaSoft India. You can write a mail to @gigasoftindia.in">sushank@gigasoftindia.in or @gigasoftindia.in">sanjay@gigasoftindia.in for further details.

    Regards
    Sushank

    #28981

    Good Idea for New Release of OptiSystem !

    #16165

    You can design wireless channel in matlab and export it into optisystem. But you have to ensure that your channel must be optical as in Optisystem you can deal with optical communication only not mobile ccommunication in he form of RF

    #12991

    Dear Sir,

    OptiSpice is the best tool for the simulations of Opto-electronic circuits. OptiSpice has electrical, Optical and thermal libraries to support the Opto-electronic system designs at the component levels.

    +1
    #12987

    You can use circulator component in the OptiSystem 😉

    #11833

    Yes, I am totally agreed that OptiSystem software’s help to understand the basic operations of fiber optics.

    #11832

    In short, FSO is assumed to simulate for terrestrial applications where as OWC is assumed to simulate for inter-satellite communications.

    +1
    #11388

    Hi Damian,
    Thanks for your reply.
    Okay let take a simple example ” I used CW multi-mode laser with LG 00 mode and send it directly over the 100 km of multimode parabolic indexed fiber. Now i compared the spatial profile after the multi-mode fiber and after the CW spatial laser by using spatial visualizer in OptiSystem. Now it shows the same spatial profile as after the laser as well as after multimode fiber. There is no effect in the spatial profile as it suppose to be attenuated when transmitted over such long distance. Can you justify this ??

    Thanks in advance.

    Regards
    Sushank

    #11364

    Thanks Sofien !! 🙂

    #11344

    Quite interesting !!

    #11343

    So the conclusion is ” OptiSystem is unable to calculate the diameter of multimode beam when pssed through wireless channels.

    #11314

    Dear Damian,
    Does it that the telescopes in the FSO link just directly images the spatial profile ? Also do the spatial profiles and beam diameter take into account modal dispersion, laser beam divergence and power modal coupling?

    Thanks in advance.

    #11310

    So it means there is no effect on spatial profile if transmitting through FSO/OWC channel which is not making the sense. If there is effect on spatial profile, spatial analyzer is not able to detect that effect. Any alternative method to measure the effect of beam through FSO/OWC channel. Thanks in advance.

    #11305

    Hi Damian,

    Thanks for your reply. Yes, exactly that the thing i want to do with OptiSystem. I am quite interested to see the effect of broadening of multimode optical beam in free space propagation but unfortunately even with free space propagation, there is no change in spatial profile with the distance. If you have solution to this problem, kindly suggest.