- This topic has 22 replies, 6 voices, and was last updated 8 years, 3 months ago by
Dr. Dhiman Kakati.
-
AuthorPosts
-
-
April 5, 2016 at 1:49 pm #35688
Atul Sharma
ParticipantHello everyone. Greetings from my side.
Does bidrectional fiber require some extra parameters to work?
Regards
Atul Sharma -
April 5, 2016 at 3:25 pm #35747
Dr. Dhiman Kakati
ParticipantHi Atul Sharma, You can directly view the differences between the bidirectional and single mode fiber from their properties. There are some extra parameters in case of bidirectional parameters which you need to set at the properties. Please have a look at the attache picture.
Regards,
DhimanAttachments:
-
April 6, 2016 at 1:35 am #35801
Atul Sharma
ParticipantHello dhiman. Good Morning. Greetings.
Thank you for showing some interest. I could see the parameters of the bidirectional fiber but i kept them as they were just like in the snapshot but it is still showing no response on the optical spectrum analyzer. Can you please help in that regard.
With regards
Atul Sharma-
April 6, 2016 at 9:51 am #35888
Dr. Dhiman Kakati
ParticipantHi Atul, I attached The snapshot to show what other parameters we need to set in case of bidirectional fiber as per our system implementation, and it shows the default values set. You have to modify it as per the system requireent.
Regards,
Dhiman
-
-
April 5, 2016 at 3:37 pm #35750
Ranjeet Kumar
ParticipantHi,
I agree to the points of Dhiman sir which he try to explain about the differences between SMF and Bidirectional fiber.
In case of bidirectional fiber , signals are transmitted in both direction simultaneously but with both having different frequencies.
In this we have a provision of optical delay.-
April 6, 2016 at 1:38 am #35802
Atul Sharma
ParticipantHi Ranjeet. Greetings.
Thanks for the response. Do we have to set different reference frequencies for the bidirectional fiber. But can you tell how because i can see there only one option for the reference wavelength/reference frequency. How do we input two different reference wavelengths?
looking forward to hear from your side.With regards
Atul Sharma
-
-
April 5, 2016 at 3:46 pm #35753
Ubaid Bhat
ParticipantHI ATUL SHARMA..
dhiman kakati correctly mentioned the difference between the parameters of the two.in optisystem for simulation purposes of the bidirectional fibers you have to introduce some delay so that both waves travel simultaneously in opposite direction.hope you got my point.
with regards
ubaid bhat-
April 6, 2016 at 1:45 am #35804
Atul Sharma
ParticipantHello Ubaid bhat. Greetings from my side.
I clearly got the difference but what about this delay component.Why would i want my system to become slow. If i introduce these delays into my system design won’t these delays render my system too slow and which in no way is the desirable. Please can you explain why should i use delays here. looking forward to your response.
With regards
Atul Sharma-
April 6, 2016 at 9:23 am #35884
Ubaid Bhat
Participanthi atul sharma…
i am glad to know that you got the use of delay concepts. Well talking about the physical significance of the delay components they are only used for simulation purposes for the bidirectional fiber to work.In actual fiber transmission they are not used and the upstream/downstream frequencies occur simultaneously without any delay element.hope you got my point
with regards
ubaid bhat -
April 6, 2016 at 9:28 am #35886
Ubaid Bhat
ParticipantAs far as the slowing of system is concerned,well definitely the simulation time is going to increase because of delay elements.But in optiwave you require the time delay element to view both upstream and down stream data transmission. I think the optiwave has no other provision for simulating bidirectional fibers. however for practical proposes there is no such need.hope you got my point.
with regards
ubaid bhat -
April 6, 2016 at 10:00 am #35890
Dr. Dhiman Kakati
ParticipantHi Atul,
Regarding why optical delay is used please refer to the following link. you may find some more information.and it is nicely explained by Damian please have a look
Regards,
Dhiman
-
-
-
April 5, 2016 at 4:06 pm #35759
SAHIL SINGH
ParticipantHi all,
Infact very valid points made by all the forum members on Bidirectional fibers… I suggest atul sharma to have a look at the image posted by Dhiman Kakati.. It will surely help you…
Regards
Sahil Singh-
April 6, 2016 at 1:48 am #35805
Atul Sharma
ParticipantHello Sahil Singh. Greetings from my side.
thank you for your suggestions but it still didn’t work out. The optical spectrum analyzer does not show anything at all. I tired to enable / disable some of the parameters but still no response on the optical spectrum analyzer. I think i may be doing some wrong. Anyway thanks a lot for showing some interest.
with regards
Atul Sharma
-
-
April 6, 2016 at 12:16 am #35779
Dr. Dhiman Kakati
ParticipantHello Everyone I am putting here some useful link on bidirectional fiber working please have a look into this.
http://iitg.vlab.co.in/?sub=59&brch=269&sim=1372&cnt=3055
Understanding Bi-Directional Optical Transceiver Technology: BiDi Transceivers
Lesson 5: Bidirectional Simulation — Working with Multiple Iterations
Regards,
Dhiman-
April 6, 2016 at 1:50 am #35806
Atul Sharma
Participanthello Dhiman. greetings.
Thanks for sharing some links. Shall try going through them and see if these help and i get some response of signals on the optical spectrum analyzer. I hope this time i do get some response on the analyzer.With Regards
Atul Sharma
-
-
April 6, 2016 at 1:21 am #35792
jyoti raina
SpectatorHello atul sir..
I too faced This problem but then used single mode fiber.. I dont know what is happening when we use the bidirectional fiber.. may be the suggestions given by forum members is correct.. i also think delay component can work. But can anyone share some example where it is used.. It will be helpful .
Thanks
With regards
jyoti raina-
April 6, 2016 at 1:59 am #35812
Atul Sharma
Participanthello Jyoti raina. greetings.
Yes i too am facing the same problem but i recommend you to go through the link provided by Dhiman. It seems to be very helpful and i am sure it is the solution to this problem. Let me repost it here.
Lesson 5: Bidirectional Simulation — Working with Multiple Iterations
try going through it. Hope it helps.
With Regards
atul Sharma-
April 6, 2016 at 7:51 am #35864
jyoti raina
SpectatorHi Atul sir . hello dhiman Sir..
Thank you so much for sharing the links.. It is indeed very helpful.. i did not know that we have to include the delay parameter for bidirectional components to work..it has helped a lot in understanding the fact behind working of bidirectional fibers..thank you so much for your help Dhiman sir..With Regards
Jyoti Raina -
April 6, 2016 at 8:37 am #35873
Dr. Dhiman Kakati
ParticipantYou are most welcome Jyoti, feel free to ask and answer any kind of query put in the forum, Discussion is the best way of learning. Thanking you.
Regards,
Dhiman
-
-
-
April 6, 2016 at 1:28 am #35796
SAHIL SINGH
ParticipantHi Dhiman,
Thanks for providing the links on the working of Bidirectional fibers… Highly appreciate your efforts..
Regards
Sahil Singh-
April 6, 2016 at 2:01 am #35813
Atul Sharma
ParticipantYes Sahil Singh. I must be thankful to Dhiman for his efforts and the link provided by him is helping me alot to understand this whole thing about the bidirectional fibers. Thank you agin dhiman.
With regards
Atul Sharma-
April 6, 2016 at 4:14 am #35828
Dr. Dhiman Kakati
Participantyou are most welcom dear Sahil and Atul Sharma. It is my pleasure that you are finding it beneficial.
Regards.
Dhiman -
April 6, 2016 at 6:43 am #35852
Atul Sharma
ParticipantHi Dhiman. Greetings.
yes it was worth mentioning here that the link you posted was helpful. Indeed i got the waveform after the fiber. But yeah there still exists some problem in the upstream. In the other post i have uploaded the osd file for your convenience. Please try checking into that i hope your efforts will help me. Thanking you in anticipation.
With Regards
Atul Shrama
-
-
-
-
AuthorPosts
- You must be logged in to reply to this topic.