Base
Full Name | Jamal |
Organization | National University of Science and Technology |
Job Title | Student |
Country |
Forum Replies Created
![Profile Photo](https://optiwave.com/wp-content/uploads/avatars/4465/dbdf65942bcb95a6886038868b8da107-bpfull.jpg)
I am not using the built in DSP block for QPSK because I have implemented the ADC separately.
![Profile Photo](https://optiwave.com/wp-content/uploads/avatars/4465/dbdf65942bcb95a6886038868b8da107-bpfull.jpg)
Nik DJENH
Were you able to solve your problem this way ?
![Profile Photo](https://optiwave.com/wp-content/uploads/avatars/4465/dbdf65942bcb95a6886038868b8da107-bpfull.jpg)
Damian, can you suggest how this predistorter would be employed to mitigate the nonlinearity introduced by an MZM ?
![Profile Photo](https://optiwave.com/wp-content/uploads/avatars/4465/dbdf65942bcb95a6886038868b8da107-bpfull.jpg)
Thank you Burhan
![Profile Photo](https://optiwave.com/wp-content/uploads/avatars/4465/dbdf65942bcb95a6886038868b8da107-bpfull.jpg)
I have the same queries
![Profile Photo](https://optiwave.com/wp-content/uploads/avatars/4465/dbdf65942bcb95a6886038868b8da107-bpfull.jpg)
Damian, is there any example that shows the working of the pre-distortion component ?
![Profile Photo](https://optiwave.com/wp-content/uploads/avatars/4465/dbdf65942bcb95a6886038868b8da107-bpfull.jpg)
Anyone?
![Profile Photo](https://optiwave.com/wp-content/uploads/avatars/4465/dbdf65942bcb95a6886038868b8da107-bpfull.jpg)
As you have quite a lot idea of matlab interfacing, I’d be pleased if you could help me with the interfacing.
I have initialised my output with OutputPort1 = InputPort1; and after doing all the work on the input signal I want to assign it to output.
I end the code with OutputPort1.Sampled.Signal = InterleavedSignal
In matlab after this assignment, I can successfully plot the OutputPort1.Sampled.Signal but the signal does not show up back in optisystem
![Profile Photo](https://optiwave.com/wp-content/uploads/avatars/4465/dbdf65942bcb95a6886038868b8da107-bpfull.jpg)
Thank you Aabid, I shall go through this
![Profile Photo](https://optiwave.com/wp-content/uploads/avatars/4465/dbdf65942bcb95a6886038868b8da107-bpfull.jpg)
Thank you Karan, Aabid and Burhan
![Profile Photo](https://optiwave.com/wp-content/uploads/avatars/4465/dbdf65942bcb95a6886038868b8da107-bpfull.jpg)
Thank you Karan for such valuable information.
second order harmonics are minimal at quadrature point as you said.
Do you know at what point are third order harmonics minimal ?
Also can you give a mathematical explanation for this ?
![Profile Photo](https://optiwave.com/wp-content/uploads/avatars/4465/dbdf65942bcb95a6886038868b8da107-bpfull.jpg)
Thank you Hamza
Maybe its a memory issue
I am using windows 10 and the system has 4Gb RAM
![Profile Photo](https://optiwave.com/wp-content/uploads/avatars/4465/dbdf65942bcb95a6886038868b8da107-bpfull.jpg)
a post-compensation method in digital domain ?
![Profile Photo](https://optiwave.com/wp-content/uploads/avatars/4465/dbdf65942bcb95a6886038868b8da107-bpfull.jpg)
equation for the transfer function of MZM ?