[SAHIL SINGHParticipant]

Hi ankita,

You are welcome…

Regards
Sahil Singh

[SAHIL SINGHParticipant]

Hello Pooja,

I agree with both Atul and shafeen . System noise is not the variation of results although if you check the eye diagram analyzer you will find noise column there but it is generally a sampled noise.

Regards
Sahil singh

[SAHIL SINGHParticipant]

Hi ANKITA,

It is rightly mentioned by Shafeen and Manoj that both ways are correct. Either connecting a 3R regenerator or connecting BER analyzer with PRBS and NRZ pulse generator… Hope this helps

Regards
Sahil Singh

[SAHIL SINGHParticipant]

Hi Ankita,

You are welcome… Hope you got the desired information…
All the Best
Regards
Sahil Singh

[SAHIL SINGHParticipant]

Hi Ankita,

The advantage of the Optical Amp is that you can explicitly state the gain and noise figure and the model is also much more simple.As far as the values of different paramaters used in case of EDFA such as system bit rate,Optical Fiber Length is concerned it depends on the type of application for which you are designing the system… Hope it helps

Regards
Sahil Singh

[SAHIL SINGHParticipant]

Hi Pooja,

You are welcome… Hope your query gets resolved.. All the best

Regards
Sahil Singh

[SAHIL SINGHParticipant]

Hi Rajguru,

Thanks for the code.. I hope this will be of help to remo…

Regards
Sahil Singh

[SAHIL SINGHParticipant]

Hi Pooja,

Buffer selector finds its use in systems which use multiple system iterations.Its significance is to filter out a particular iteration and then only the signal of that particular iteration is forwarded to the detector.Make sure if you use a buffer selector in your design,,you change the signal index in the analyser window to the same iteration value as you set for your buffer selector.Or else you will find no output values for BER and Quality factor at all other signal index values.I will also suggest you to go through the following links.. It will surely be of great help..

BUFFER SELECTOR

Regards
Sahil Singh

[SAHIL SINGHParticipant]

Hi Remo,

Well I hope you get your query resolved…
All the best

Regards
Sahil Singh

[SAHIL SINGHParticipant]

Hi Remo,

Do let me know if it was useful…
All the best

Regards
Sahil Singh

[SAHIL SINGHParticipant]

Hi Remo,

I think we already had a discussion on this.. I would suggest you to find it on the internet… I did try to find it out for you but i am not sure whether it will work or not.. Try the following links
https://www.eecis.udel.edu/~bohacek/Classes/SensorNets2007/propagationhomework.pdf

Log Distance Path Loss or Log Normal Shadowing Model

Hope it helps

Regards
Sahil Singh

[SAHIL SINGHParticipant]

HI Remo,

You are welcome…

Regards
Sahil Singh

[SAHIL SINGHParticipant]

Hello Remo,

Hope your query gets resolved soon.

Regards
Sahil Singh

[SAHIL SINGHParticipant]

Hi Pooja,

You are welcome.. I really appreciate such meaningful discussions… All the best..

Regards
SAHIL Singh

[SAHIL SINGHParticipant]

Hi Remo,

I agree with you that the values of receiver sensitivity are application specific..Thanks for the information

Regards
Sahil Singh