- This topic has 30 replies, 12 voices, and was last updated 8 years, 6 months ago by deepak jha.
-
AuthorPosts
-
-
April 12, 2016 at 4:22 pm #36488pooja rawatParticipant
also i want to know the function of buffer selector in optisystem.
Thanks
Regards -
April 13, 2016 at 7:28 am #36559SAHIL SINGHParticipant
Hi Pooja,
Buffer selector finds its use in systems which use multiple system iterations.Its significance is to filter out a particular iteration and then only the signal of that particular iteration is forwarded to the detector.Make sure if you use a buffer selector in your design,,you change the signal index in the analyser window to the same iteration value as you set for your buffer selector.Or else you will find no output values for BER and Quality factor at all other signal index values.I will also suggest you to go through the following links.. It will surely be of great help..
Regards
Sahil Singh-
April 14, 2016 at 10:53 pm #36791nagesh kuknoorParticipant
Hi Sahil,
Thanks for the link you have provided. It must be of great help to everyone. I also believe that Buffer selector is used to select signal data.Thanks
-
-
April 13, 2016 at 7:56 am #36569pooja rawatParticipant
Hello Sahil
Thank you so much. I appreciate. Shall try going through the link and see if it helps 🙂
Thanks
Regards -
April 13, 2016 at 8:01 am #36570SAHIL SINGHParticipant
Hi Pooja,
You are welcome… Hope your query gets resolved.. All the best
Regards
Sahil Singh -
April 13, 2016 at 8:08 am #36573Ankita SharmaParticipant
Hi Pooja,
Sahil Sir has mentioned it rightly that Buffer selector finds its use in systems which use multiple system iterations.. Also try going through the links as suggested in the previous post..
Regards
Ankita-
April 17, 2016 at 9:51 am #37446pooja rawatParticipant
Hello Ankita.
Thank you . I agree with that. Thanks for the help 🙂
Regards
pooja
-
-
April 13, 2016 at 8:08 am #36574pooja rawatParticipant
Thanks Sahil Singh 🙂
-
April 13, 2016 at 2:42 pm #36611Atul SharmaParticipant
Hello Pooja. Greetings.
As far as your query is concerned about the buffer selector you can refer to the linkLesson 5: Bidirectional Simulation — Working with Multiple Iterations
It explains the usage of buffer selectors in system designs. It is usually used in bidirectional systems and most importantly for delays. Try going through the link it will be surely of some help. Hopefully it will help.With regards
Atul Sharma-
April 17, 2016 at 9:54 am #37447pooja rawatParticipant
Hello Atul.
The link was very helpful. Thank you so much for the link. It has mentioned its usage if we need to use bidirectional components in our design but still it was very helpful. Thank you 🙂Regards
Pooja
-
-
April 13, 2016 at 2:49 pm #36612deepak jhaParticipant
Hi Pooja,
It has been rightly mentioned by various forum members that Buffer selector finds its use in systems which use multiple system iterations.. Also try to consult the various links as suggested in the previous comments.. Hope it helps
-
April 17, 2016 at 9:56 am #37448pooja rawatParticipant
Hi Deepak.
Yes i agree with you. It was very helpful indeed. I went through it and it provided me with some idea.Regards
Pooja
-
-
April 13, 2016 at 3:10 pm #36615Remo De SuzaParticipant
Hi All.
I agree with Atul sharma about the use of buffer selector in bidirectional systems. If you are designing a PON network you might have to use the buffer selector for multiple iterations. I will suggest you to go through the link provided by Atul. It will be of some help for sure.Thanks and regards
Remo-
April 17, 2016 at 9:58 am #37449pooja rawatParticipant
Hello Remo.
Thank you very much for your acknowledgement. I appreciate that.Regards
Pooja
-
-
April 14, 2016 at 2:48 am #36649Ankita SharmaParticipant
Hi all,
A very useful link provided by Atul Sharma… Thanks for the information…
Regards
Ankita-
April 17, 2016 at 10:00 am #37450pooja rawatParticipant
Hello Ankita.
Thank you for your suggestion 🙂Regards
pooja
-
-
April 14, 2016 at 2:54 pm #36772Rajguru M. MohanParticipant
Hi pooja rawat,
By using Buffer Selector, we could able to select the signal data associated with a specified iteration in a series of iterations.
We set parameter Selection as its default value to 0 (the indexing for iterations starts at 0). If We set the parameter Selection as its value to Iterations – 1 (by using Script mode) the component will forward the signal data associated with the final iteration of the series. For example if Iterations = 5 (within Layout Parameters/Signals), the Buffer Selector will forward the signal data associated with the 5th iteration of the CW laser.For more information you could refer to pdf file of component library of Optisystem software.
Thanks
Rajguru-
April 17, 2016 at 10:02 am #37451pooja rawatParticipant
Hi Rajguru.
I agree with you. The information you have shared was already given in the link but anyway thank you so much. It really helped.Regards
Pooja
-
-
April 14, 2016 at 5:19 pm #36787deepak jhaParticipant
Hi Rajguru,
really appreciate your effors…
All the bestThanks and regards
-
April 17, 2016 at 10:03 am #37452pooja rawatParticipant
Hi Deepak.
Thanks a lot 🙂
Regards
Pooja
-
-
April 14, 2016 at 10:55 pm #36792nagesh kuknoorParticipant
Hi All,
It is rightly said by Rajguru that buffer selector is used to select a data line. This must help Pooja in getting an idea about the different uses.
Thanks
-
April 17, 2016 at 10:05 am #37454pooja rawatParticipant
Hi Nagesh.
I agree with that but the need for me is different other than using it as a data line selector. Thank you anyways 🙂Regards
Pooja
-
-
April 17, 2016 at 1:33 pm #37528Manoj KumarParticipant
Hi all,
I agree with sahil Sir here that Buffer selector finds its use in systems which use multiple system iterations.. Also the link provided is very useful..
Regards
-
April 17, 2016 at 2:47 pm #37561Domail SinghParticipant
Hi Manoj
I agree with you. Buffer selector is used as a data line selector.Regards
Domail
-
-
April 17, 2016 at 1:35 pm #37529Manoj KumarParticipant
Hi Deepak,
Not able to see your comments… It is displaying awaiting moderation ?
-
April 17, 2016 at 2:38 pm #37558deepak jhaParticipant
Hi Pooja,
You are welcome…
Regards
-
April 17, 2016 at 6:12 pm #37715Rahul TiwariParticipant
Hi Yogita,
As suggested in the other posts do not comment on the forum for a time being….
Regards
Rahul Tiwari -
April 19, 2016 at 3:14 am #38284FAYIQA NAQSHBANDISpectator
HI POOJA..
I agree to most of what other members have already mentioned..I would add that the application of buffer selector can be more application specific..I hoe that would help you…Regards
-
April 19, 2016 at 3:20 am #38286deepak jhaParticipant
Hi Fayiqa,
I agree that Buffer selector can be used for specific applications..
Regards
-
April 19, 2016 at 3:24 am #38289deepak jhaParticipant
Hi Manoj.
Are you not able to see my comments ?
What is this Awaiting moderation ?
/
-
April 17, 2016 at 10:07 am #37457pooja rawatParticipant
Hello Deepak Kumar.
Can’t see your reply but anyway thank you.Regards
Pooja
-
-
AuthorPosts
- You must be logged in to reply to this topic.