How can I design a ring resonator using Optisystem?

hi umer syed,

ther is no ring resonator in optisystem library.but using probably optibpm or optiFDTD tools of optiwave you can create such devices by your self.and import these devices in optisytem (i.e cosimulation)

for you convence i a post some links which might help you;

Ring Resonator

Devices out of Scope of the BPM Technique (ring resonator)

New Project

New Design

among these link lower one provides details of how to design ring waveguide

with regards

Hi Umer,
For the design of ring resonator , the circuit must be divided at least into four elements namely, the two coupling regions and several bent elements. They are symmetrical, so you can simulate just one using OptiBPM as mentioned by Asif. you also have to describe the phase delay (perhaps also losses) in the bent arcs. The realistic ring resonator design and its representation in OptiSystem can be done by Co-simulation with OptiBPM. You can refer to link https://optiwave.com/optibpm-manuals/bpm-ring-resonator/
Regards

Hello Umer,
If you can implement the ring resonator using OptiBPM then you do not require MATLAB code at all. All You need to do then is that you can look for the co-simulation of OpyiBPM and Optisystem.
In case you are not able to implement it using OptiBPM then you have to write a code for it in MATLAB anfd interface the MATLAB module with Optisystem.

Regards

yo are welcome umer

As already discussed, you can use OptiFDTD/OptiBPM for designing the Ring resonator. OptiSystem is used for designing the networks using the components available in component library. But if you want to simulate at component level, You have to use another software from OptiSystem. After that in order to evaluate the performance of that resonator in practical applications you can import that components in OptiSystem to evaluate the performance at network level.
You can also import ring resonator from matlab to optisystem.
I hope this will help you.

you are welcome umer.
Once you are done with MATLAB code compilation then you just have to refer to few examples in sample files of optisystem which could give you a clear idea how to do the interfacing part of the design.
You can also refer to the basic example which shows BER Analysis Using Matlab®/OptiSystem Automation.

Matlab Cosimulation

regards

you are welcome umer.

I have a MATLAB code for ring resonators, where in the through port and drop port transmission intensities are plotted. If i import this to Optisystem, on which visualizer can i see the output, as there is no visualizer which plots between wavelength and transmission intensity, tried the visulaizers availible with Optisystem, but unable to visualize the outputs.