| Step | Action |
| 1 | From the Simulation menu, select 2D 32bit Simulation Parameters.
Simulation parameters dialog box appears |
| 2 | Select TE as the 2D simulation type |
| 3 | Turn off the auto check for Mesh Delta. Type the following values for the mesh size:
Mesh Delta X (um): 0.01 Mesh Delta Z (um): 0.01 |
| 4 | To set up the boundary condition parameters, click Advanced. The Boundary Conditions dialog box appears. Type the following values for the boundary condition:
•    Anisotropic PML layer number: 10 •    Theoretical Reflection Coefficient: 1.0e-12 •    Real Anisotropic PML Tensor Parameter: 10. •    Power of grading Polynomial: 3.5 |
| 5 | Run for 800 time steps |
© 2023 Optiwave Systems Inc.