Listing of scientific papers, technical journals, periodicals, and conference publications which reference the use of OptiBPM.
[1] H. S. A. Elnasr and M. H. Aly, “2×2 electro-optic switch based on MZI at 1.55 μm: design and performance evaluation,” 2015.
[2] S. Kumar, G. Singh, and A. Bisht, “4×4 signal router based on electro-optic effect of Mach–Zehnder interferometer for wavelength division multiplexing applications,” Optics Communications, vol. 353, pp. 17–26, 2015.
[3] M. Hadjloum, M. El Gibari, H. Li, M. Halbwax, J.-P. Vilcot, and A. S. Daryoush, “40 GSPS all-optical ADC with ENOB of 6.6 using EO polymer optical deflector and spatial quantizer,” in Microwave Photonics (MWP), 2015 International Topical Meeting on, 2015, pp. 1–4.
[4] M. Vladescu and P. Schiopu, “Advanced educational program in optoelectronics for undergraduates and graduates in electronics,” in Advanced Topics in Optoelectronics, Microelectronics, and Nanotechnologies 2014, 2015, p. 92580B–92580B.
[5] C. Jin, B. Ung, Y. Messaddeq, and S. LaRochelle, “Annular-cladding erbium doped multicore fiber for SDM amplification,” Optics express, vol. 23, no. 23, pp. 29647–29659, 2015.
[6] C. Burtscher, M. Lucki, and D. Seyringer, “COMPARISON OF OPTICAL PROPERTIES OF 1×8 SPLITTERS BASED ON Y-BRANCH AND MMI APPROACHES,” Romanian Reports in Physics, vol. 67, no. 4, pp. 1578–1585, 2015.
[7] C. Zhang, J. Zhao, C. Miao, H. Li, H. Bai, and M. Zhang, “Curvature and temperature sensor based on bulge-taper structures interferometer with embedded fiber Bragg grating,” Optical Engineering, vol. 54, no. 8, pp. 087104–087104, 2015.
[8] D. Chack, V. Kumar, S. K. Raghuwanshi, and D. P. Singh, “Design and analysis of O–S–C triple band wavelength division demultiplexer using cascaded MMI couplers,” Optics Communications, vol. 382, pp. 324–331, 2017.
[9] B. Kumar, S. Sinha, and N. Mandal, “Design and development of an eletro-optic type flow transmitter using Mach-Zehnder Interferometer,” in Industrial Instrumentation and Control (ICIC), 2015 International Conference on, 2015, pp. 602–606.
[10] N. Mandal, B. Kumar, and R. Sarkar, “Design and development of an optical pressure sensing system using bellows as primary sensor,” in 2015 IEEE International Conference on Telecommunications and Photonics (ICTP), 2015, pp. 1–4.
[11] D. Chack, V. Kumar, and S. Raghuwanshi, “Design and performance analysis of InP/InGaAsP-MMI based 1310/1550-nm wavelength division demultiplexer with tapered waveguide geometry,” Opto-Electronics Review, vol. 23, no. 4, pp. 271–277, 2015.
[12] S. Kumar, A. Bisht, G. Singh, K. Choudhary, K. Raina, and A. Amphawan, “Design of 1-bit and 2-bit magnitude comparators using electro-optic effect in Mach–Zehnder interferometers,” Optics Communications, vol. 357, pp. 127–147, 2015.
[13] S. Kumar, G. Singh, A. Bisht, and A. Amphawan, “Design of D flip-flop and T flip-flop using Mach–Zehnder interferometers for high-speed communication,” Applied optics, vol. 54, no. 21, pp. 6397–6405, 2015.
[14] A. Azhar and R. W. Purnamaningsih, “Design of GaN-based S-bend Y-branch power splitter with MMI structure,” in International Seminar on Photonics, Optics, and Applications 2014, 2015, pp. 944411–944411.
[15] M. Ariannejad et al., “Design of optical single mode splitter using ion exchange method for ammonia biosensor,” in Micro and Nanoelectronics (RSM), 2015 IEEE Regional Symposium on, 2015, pp. 1–4.
[16] S. Kumar, A. Bisht, A. Bisht, G. Singh, and A. Amphawan, “Design of photonics crystal fiber sensors for bio-medical applications,” in SPIE Optical Metrology, 2015, p. 95252B–95252B.
[17] S. Kumar, S. K. Raghuwanshi, and B. Rahman, “Design of universal shift register based on electro-optic effect of LiNbO3 in Mach–Zehnder interferometer for high speed communication,” Optical and Quantum Electronics, vol. 47, no. 11, pp. 3509–3524, 2015.
[18] M. S. Ab-Rahman, F. S. Ater, and R. Mohamed, “Effects of random sidewall roughness on optical power splitter,” Optical Engineering, vol. 54, no. 5, pp. 055103–055103, 2015.
[19] M. S. Ab Rahman, F. S. Ater, and R. Mohamed, “Effects of sidewall roughness on optical power splitter,” Journal of Optoelectronics and Advanced Materials, vol. 17, no. 5–6, pp. 699–703, 2015.
[20] M. Hadjloum, M. El Gibari, H. Li, and A. S. Daryoush, “Electrode structure for both poling and driving of the electro-optic polymer in an analog-to-digital converter based on an optical deflector,” in Telecommunications Forum Telfor (℡FOR), 2015 23rd, 2015, pp. 567–570.
[21] F. Geoffray, L. Bastard, and J.-E. Broquin, “High confinement ion-exchanged waveguides for nonlinear applications,” Ceramics International, vol. 41, no. 6, pp. 8034–8039, 2015.
[22] S. Kumar, A. Bisht, G. Singh, and A. Amphawan, “Implementation of 2-bit multiplier based on electro-optic effect in Mach–Zehnder interferometers,” Optical and Quantum Electronics, vol. 47, no. 12, pp. 3667–3688, 2015.
[23] S. K. Raghuwanshi, A. Kumar, and A. Rahman, “Implementation of high speed optical universal logic gates using the electro-optic effect-based Mach–Zehnder interferometer structures,” Journal of Modern Optics, vol. 62, no. 12, pp. 978–988, 2015.
[24] A. Kumar and S. K. Raghuwanshi, “Implementation of optical gray code converter and even parity checker using the electro-optic effect in the Mach–Zehnder interferometer,” Optical and Quantum Electronics, vol. 47, no. 7, pp. 2117–2140, 2015.
[25] S. Kumar, A. Bisht, G. Singh, K. Choudhary, and D. Sharma, “Implementation of wavelength selector based on electro-optic effect in Mach–Zehnder interferometers for high speed communications,” Optics Communications, vol. 350, pp. 108–118, 2015.
[26] M. Hadjloum, M. El Gibari, H. Li, and A. S. Daryoush, “Microwave and optical design optimatization of polymer phase modulators with over 40 GHz BW,” in 2015 International Conference on Microwave and Photonics (ICMAP), 2015, pp. 1–2.
[27] L. Predoana et al., “Nanostructured Er 3+-doped SiO 2–TiO 2 and SiO 2–TiO 2–Al 2 O 3 sol–gel thin films for integrated optics,” Optical Materials, vol. 46, pp. 481–490, 2015.
[28] H. A. Razak, H. Haroon, A. S. M. Zain, P. S. Menon, S. Shaari, and W. M. Mukhtar, “On the performance of Mach-Zehnder-Interferometer (MZI) optical modulator on silicon-on-insulator (SOI),” in Micro and Nanoelectronics (RSM), 2015 IEEE Regional Symposium on, 2015, pp. 1–4.
[29] S. Kumar, A. Bisht, A. Bisht, and A. Amphawan, “Optical Bit Pattern Recognition System for Optical Network Applications,” in Frontiers in Optics, 2015, p. JW2A–71.
[30] P. P. Sahu, “Optical pulse controlled two mode interference coupler based logic gates,” Optik-International Journal for Light and Electron Optics, vol. 126, no. 4, pp. 404–407, 2015.
[31] S. Kumar, A. Bisht, and A. Amphawan, “Optical Universal Logic Gates based on Electro-Optic Effect of Lithium Niobate in Mach-Zehnder Interferometer,” in Frontiers in Optics, 2015, p. FTu3F–3.
[32] R. Khatun, K. T. Ahmmed, A. Z. Chowdhury, and R. Hossen, “Optimization of 2×2 MZI Electro-Optic Switch and Its Application as Logic Gate,” in 18th International Conference on Computer and Information Technology, 2015.
[33] Y. Zhang, Y. Chen, Z. Zhong, P. Xu, H. Chen, and S. Yu, “Orbital angular momentum (OAM) modes routing in a ring fiber based directional coupler,” Optics Communications, vol. 350, pp. 160–164, 2015.
[34] P. Samadian, “Photonic Integrated Circuits Challenges & Solutions: Homogenization, Polarization Management and Coupling,” Université d’Ottawa/University of Ottawa, 2015.
[35] S. Kumar, G. Singh, A. Bisht, S. Sharma, and A. Amphawan, “Proposed new approach to the design of universal logic gates using the electro-optic effect in Mach–Zehnder interferometers,” Applied optics, vol. 54, no. 28, pp. 8479–8484, 2015.
[36] S. K. Raghuwanshi, S. K. Jindal, and B. Rahman, “Realization of MOEMS Based Temperature Sensor Using Externally Modulated LINBO3 Mach Zehnder Interferometer,” Sensor Letters, vol. 13, no. 9, pp. 756–763, 2015.
[37] S. K. Jindal, S. K. Raghuwanshi, and A. Kumar, “Realization of MOEMS pressure sensor using mach zehnder interferometer,” Journal of Mechanical Science and Technology, vol. 29, no. 9, pp. 3831–3839, 2015.
[38] A. Kumar and S. K. Raghuwanshi, “Realization of Optical Digital Magnitude Comparator Using Electro-Optic Effect Based Cascaded Mach-Zehnder Interferometer Structure,” Journal of Nanoelectronics and Optoelectronics, vol. 10, no. 6, pp. 773–782, 2015.
[39] X. SUN, X. Ning, L. ZHANG, and R. ZHAO, “Research on the Plane of the Junction of the Ridge Y Branch Waveguide Structure,” Laser Journal, vol. 10, p. 004, 2015.
[40] Z. Ma, H. Chen, K. Wu, Y. Zhang, Y. Chen, and S. Yu, “Self-imaging of orbital angular momentum (OAM) modes in rectangular multimode interference waveguides,” Optics express, vol. 23, no. 4, pp. 5014–5026, 2015.
[41] M. Hadjloum, M. El Gibari, G. Lirzin, H. Li, and A. S. Daryoush, “Study of an Electro-Optic Polymers Leaky Waveguide Deflector and its Microwave access across a GCPW to CMS transition for realizing a 40 GSPS AOADC,” in 2015 International Conference on Microwave and Photonics (ICMAP), 2015, pp. 1–2.
[42] M. N. Khan, “Thermal and optical design analyses, optimizations, and experimental verification for a novel glare-free LED lamp for household applications,” Applied optics, vol. 54, no. 21, pp. 6566–6574, 2015.