Forum Replies Created

    #36033
    Profile Photo
    varinder singh
    Participant

    hello syed
    you are talking about the optical communication in sea water…optical communication through sea water is possible ….but not without optical fibres may be in future…
    with regards

    #35949
    Profile Photo
    varinder singh
    Participant

    helo sahil,
    thanks for helping the syed ..
    regards
    varinder singh

    #35948
    Profile Photo
    varinder singh
    Participant

    hello..
    i think qpsk can be used as dpsk …so that you can convert into dqpsk..qpsk only transfer two bits and dpsk transfer only one bit…so you can convert simply into dqpsk..
    with regards

    #35946
    Profile Photo
    varinder singh
    Participant

    hiii atul…
    the problem which you are facing may be due to broken if the fiber ..please check the fiber or replace it with new one..may be something happen..
    with regards varinder singh rajput

    #35945
    Profile Photo
    varinder singh
    Participant

    helo ..sahil..
    i mean if she want information about bessel filter and lpf …then for that she must use that book..
    i read that book during my btech days..
    nothing more.
    with regards

    #35943
    Profile Photo
    varinder singh
    Participant

    hii.. sahil.
    itz my pleasure
    with regards

    #35941
    Profile Photo
    varinder singh
    Participant

    helo naazira..
    first of all thanks for sharing your problem on optiwave forums..from my point of view i think lpf filters mostly commnly used for demodulation purpose in communication sytem..but laser light or optical light frequency can be used as carrier frequency for modulation..so mostly we are using lpf at the receiver end..and bessel filter are mostly commnly used for frequency modulation…or in wideband fm.
    if you require more information about this topic ..then use sanjay sharma.. it will help you..
    with regards

    #35939
    Profile Photo
    varinder singh
    Participant

    helo sir..
    if you are working on fttx.. then these papers will help you..
    i hope you were able to do it.
    http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=6645106
    http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=5357385
    with regards

    #35938
    Profile Photo
    varinder singh
    Participant

    hiiii…everybody…
    thanks for sharing info with me…
    i really appreciate .
    with regards

    #35593
    Profile Photo
    varinder singh
    Participant

    thanks ranjeet ,,,,,,,,,,,,,,,,,,,

    #35588
    Profile Photo
    varinder singh
    Participant

    helo dhiman…..
    you may change the data rate e.g. 20 gbps, 40 gbps and minimize channel spacing to 50ghz and 25 ghz .
    And you will find the difference in results.i hope you will do it.
    with regards

    #35533
    Profile Photo
    varinder singh
    Participant

    thanks aabid for providing this information to the jyoti raina …….i appreciate your effort

    thanks with regards

    #35532
    Profile Photo
    varinder singh
    Participant

    hiiii .jyoti,
    i got ur problem………..A perfect eye diagram contains an immense amount of parametric information about a signal, like the effects deriving from physics, irrespective of how infrequently these effects occur. If a logic 1 is so distorted that the receiver at the far end can misjudge it for logic 0, you will easily discern this from an eye diagram. What you will not be able to detect, however, are logic or protocol problems, such as when a system is supposed to transmit a logic 0 but sends a logic 1, or when the logic is in conflict with a protocol.
    with regards

    #35531
    Profile Photo
    varinder singh
    Participant

    hiiiiiiiii..jyoti,
    i got ur problem……..A perfect eye diagram contains an immense amount of parametric information about a signal, like the effects deriving from physics, irrespective of how infrequently these effects occur. If a logic 1 is so distorted that the receiver at the far end can misjudge it for logic 0, you will easily discern this from an eye diagram. What you will not be able to detect, however, are logic or protocol problems, such as when a system is supposed to transmit a logic 0 but sends a logic 1, or when the logic is in conflict with a protocol.
    with regards

    #35517
    Profile Photo
    varinder singh
    Participant

    i hope you are able to find the solution of your problem…
    thanks with regards