Base
Full Name | mehdi taherpoor |
Organization | University |
Job Title | Researcher |
Country |
Forum Replies Created
![Profile Photo](https://optiwave.com/wp-content/uploads/avatars/33977/5b7e49dd2cdfd-bpfull.png)
Hi, steve
Can you give me a sample simulation file on this?
thanks.
![Profile Photo](https://optiwave.com/wp-content/uploads/avatars/33977/5b7e49dd2cdfd-bpfull.png)
Hi, Mr.Ahmed
I use the software installed at the university. You can not place the ocl file for this component here to install it to my version??
![Profile Photo](https://optiwave.com/wp-content/uploads/avatars/33977/5b7e49dd2cdfd-bpfull.png)
Hi, Mr. Ahmad
I need fbg sensor component with these parameters. I have version 15 of optisystem.
You can send fbg sensor component for me to add the library in optisystem???
![Profile Photo](https://optiwave.com/wp-content/uploads/avatars/33977/5b7e49dd2cdfd-bpfull.png)
Hi Mr. Ahmad,
for exp in temp= -25 and without strain, shift wavelength is 1544.293163 and reference wavelength(Bragg(central) wavelength) is 1545 nm.
and for strain sensor temp is 25 and strain is 0.0002, shift wavelength is 1548.241488 and reference wavelength(Bragg(central) wavelength) is 1548 nm.
how can I calculate that ERROR?? pls, explain thanks.
![Profile Photo](https://optiwave.com/wp-content/uploads/avatars/33977/5b7e49dd2cdfd-bpfull.png)
Hi Ahmad,
thanks.
I realized that the peaks can be changed by changing iteration.
Why increase its rise to the next peaks?
What is the reason for the use of optical fiber between sensors?
![Profile Photo](https://optiwave.com/wp-content/uploads/avatars/33977/5b7e49dd2cdfd-bpfull.png)
Hi Mr. Ahmad
I have version 15 of the optisystem software.
In the examples section, there was only one example for designing these types of sensors.
I sent you an email for more information.
Thankful
![Profile Photo](https://optiwave.com/wp-content/uploads/avatars/33977/5b7e49dd2cdfd-bpfull.png)
Because it is possible to load the optisystem file
The site does not exist. Link download the simulated file in optisystem software
http://s9.picofile.com/file/8341379926/optisys.rar.html
![Profile Photo](https://optiwave.com/wp-content/uploads/avatars/33977/5b7e49dd2cdfd-bpfull.png)
Attached files
And the files at.txt and br.txt, are for optigrating and optigrating_1 in optisystem software respectively.
![Profile Photo](https://optiwave.com/wp-content/uploads/avatars/33977/5b7e49dd2cdfd-bpfull.png)
every body please help me. i need simulation this article
![Profile Photo](https://optiwave.com/wp-content/uploads/avatars/33977/5b7e49dd2cdfd-bpfull.png)
hi mr steve dods.
Thankful. But the files that you attach are different from the article files. It is also stated in the article that two Gaussian apodized FBGs are used. Please help me in the full and accurate simulation of this article.