- This topic has 3 replies, 2 voices, and was last updated 4 years, 2 months ago by Amin Khorshidahmad.
-
AuthorPosts
-
-
August 12, 2020 at 3:57 pm #67896Ramya ArumugamParticipant
Hi
Can you help by saying how to build and analyse tiled or inclined FBG using optigrating? If you could guide me it will be more helpful -
August 13, 2020 at 8:43 am #67901Amin KhorshidahmadParticipant
Hi Ramya,
The OptiGrating currently does not support titled FBGs. However, we are in the process of releasing a component for tilted FBGs.
We would be happy to discuss your specific requirements and might be able to offer design-simulation services in the meantime. We are also open to partnership in research projects with academia.BTW, please let me know if you had further issues using the trail version.
Kind regards,
Amin -
August 13, 2020 at 12:59 pm #67912Ramya ArumugamParticipant
Hi sir,
Currently a team in our college (SRM Institute of Science and Technology) is working under guidance of Dr. R. kumar and Dr. S. Dhanalakshmi of ECE department on various applications of FBG and its variations. As a part of this we have to analyse the various design specifications to optimize the fiber so that we can go for fabrication. Our requirement till now is as listed below. We want to analyse which will suit our application. Can you help us? How can we use optigrating for such TFBG analysing?Common Specifications:
Center Wavelength (CW): 1550nm
CW Tolerance: +/- 0.5 nm
BW (Bandwidth @ 3dB): 0.3nm
BW Tolerance: +/- 0.05nm
Reflectivity: >50%
Temperature rating: -20C to +100CModel 1:
Tilt Angle: +15 Degrees
Cladding thickness: 125 um
Coating type on the Tilted FBG: None
Optical Connectors: FC/APC at both ends
Grating length- 20mm
Fiber length- 1mModel 2:
Tilt Angle: +15 Degrees
Cladding thickness: 125 um
Coating type on the Tilted FBG: PDMS
Optical Connectors: FC/APC at both ends
Grating length- 20mm
Fiber length- 1mModel 3:
Tilt Angle: +15 Degrees
Cladding thickness: 80 um
Coating type on the Tilted FBG: None
Optical Connectors: FC/APC at both ends
Grating length- 20mm
Fiber length- 1mModel 4:
Tilt Angle: +82 Degrees
Cladding thickness: 125 um
Coating type on the Tilted FBG: None
Optical Connectors: FC/APC at both ends
Grating length- 20mm
Fiber length- 1m -
August 14, 2020 at 3:43 pm #67926Amin KhorshidahmadParticipant
Dear Ramya,
Thank you for sharing the designs with us.
I was wondering if you have access to an active license of OptiGrating (or any of our other products) or interested in acquiring such a modeling tool?
As I already mentioned, we are open to collaborate with academia and interested in having experimental verification for our simulation tools. In this regards, we are able to simulate your tilted FBG sensor designs and share the results to be verified against your experiments.
Kind regards,
Amin
-
-
AuthorPosts
- You must be logged in to reply to this topic.