- This topic has 54 replies, 13 voices, and was last updated 8 years, 7 months ago by FAYIQA NAQSHBANDI.
-
AuthorPosts
-
-
April 14, 2016 at 8:12 am #36621shafeen al yasinParticipant
Hello Everybody,
Regards.Could anyone explain the application of Sweep layout parameter in optisystem software. What for and where can we use it. Any component especially the CW laser has three modes. One mode is normal and the other is sweep mode. What are the benefits of this. Can anyone please explain it with some implementation or any project file where it is used. I will be thankful.
Thanks
Regards -
April 14, 2016 at 1:46 pm #36739Atul SharmaParticipant
Hello Shafeen Al yasin. Greetings.
I would suggest you to go through Lesson 5 of the tutorial which mentions the function of sweep. You can go through it to get some idea
Lesson 5: Bidirectional Simulation — Working with Multiple Iterations
I hope this would help you to some extent.With regards
Atul-
April 14, 2016 at 2:21 pm #36755shafeen al yasinParticipant
Hi Dear
What i understood from the links is that we can use multiple iterations for our values.
Does this mean that i can use sweep mode for bit rate also..-
April 14, 2016 at 2:48 pm #36770Atul SharmaParticipant
Hello Shafeen.
No we are not able to sweep the bit rate although we can sweep every other parameter. What is your actual problem with sweep?
Do you want to evaluate your system for more than one data rate?With Regards
Atul -
April 15, 2016 at 12:24 am #36827shafeen al yasinParticipant
Hi Atul,
Are you sure we are not able to sweep bit rate?
How are then we able to test a system for various data rates.?
-
-
April 14, 2016 at 11:05 pm #36796nagesh kuknoorParticipant
Hello Shafeen,
I agree with Atul. You must go through the link. To understand sweep and lot of things about iterations, graphs, legends you should go through Lesson 5 of the optisystem pdf.
Thanks-
April 15, 2016 at 12:27 am #36828shafeen al yasinParticipant
Hello Nagesh,
Thank you for the reply i appreciate. It was indeed helpful.
Regards
Shafeen -
April 16, 2016 at 2:36 pm #37254nagesh kuknoorParticipant
Hi Shafeen,
You are welcome. I hope it was helpful.
Regards
-
-
April 17, 2016 at 4:35 pm #37651FAYIQA NAQSHBANDISpectator
HI SHAFEEN..
I would suggest you to refer to the links which ATUL SHARMA has provided.. It is a lesson about the sweep parameter , its advantages and many more things .. I hope it will serve your cause..Thanking you.Regards
FAYIQA-
April 17, 2016 at 5:55 pm #37701shafeen al yasinParticipant
Hi Fayiqa,
Thank you so much for the reply. I appreciate that. It has been very helpful overall.Regards
Shafeen -
April 18, 2016 at 3:58 am #37760FAYIQA NAQSHBANDISpectator
HI SHAFEEn..
You are welcome.
-
-
-
April 14, 2016 at 2:17 pm #36754shafeen al yasinParticipant
Hi Atul Sharma
Thanks for the link. It is indeed helpful. I somewhat got the idea why and what for is this option. Thanks for clearing a basic thing.. -
April 14, 2016 at 2:22 pm #36756Ankita SharmaParticipant
Hi Shafeen al Yasin,
Yes it has been nicely explained in the link provided by atul… It will surely be of help…
Regards
Ankita -
April 14, 2016 at 2:24 pm #36757shafeen al yasinParticipant
Hi Ankita Sharma
Thanks for the reply. -
April 14, 2016 at 2:26 pm #36758Ankita SharmaParticipant
Hi Shafeen al Yasin,
I welcome you to the forum and I am glad to know that you got the desired information on the forum…
regards
Ankita-
April 14, 2016 at 2:34 pm #36762shafeen al yasinParticipant
Hi Ankita.
Thank you so much. Yes the link was indeed helpful to me as i was looking to know about the sweep option..
-
-
April 14, 2016 at 2:32 pm #36761Rajguru M. MohanParticipant
Hi shafeen al yasin,
I would suggest you to please refer to following links to get understanding of Sweep iteration
https://optiwave.com/resources/latest-news/new-version-optisystem-13-0/-
April 14, 2016 at 2:37 pm #36763shafeen al yasinParticipant
Hi Rajguru mohan
I am so grateful to you. I shall go through the links you have provided. I understood the basic thing but still i will go through the links for further information.
Thank you
-
April 15, 2016 at 1:03 pm #36923Domail SinghParticipant
Hi Rajguru,
I think the links provided by you are very helpful. Shafeen should be benefited by these links.
Regards
Domail
-
-
April 14, 2016 at 3:11 pm #36774Ankita SharmaParticipant
Hi Rajguru,
Thanks for the information… Really appreciate your efforts…
Regards
Ankita -
April 14, 2016 at 4:48 pm #36782deepak jhaParticipant
Hello Shafeen.
It has rightly been mentioned by Atul that we are not able to sweep the bit rate although we can sweep every other parameter..
All the best..Thanks and regards
-
April 15, 2016 at 12:29 am #36829shafeen al yasinParticipant
Hi Deepak,
Thank you for your concern i appreciate that. It was helpful..
-
-
April 14, 2016 at 4:50 pm #36783deepak jhaParticipant
Hi Rajguru,
Thanks for providing so much of the valuable information…
Cheers..Thanks and regards
-
April 14, 2016 at 11:08 pm #36797nagesh kuknoorParticipant
Hi All.
I was unaware about the sweep of bit rate. Personally i think we should be able to sweep bit rate because sometimes we require to analyze performance of same system for various bit rates. I think sweep will work there though i am not sure.
Anyway thanks for this point Shafeen.Regards
-
April 15, 2016 at 12:31 am #36830shafeen al yasinParticipant
Hi Nagesh,
I think you understood my query. I think we should be able to sweep the bit rate. I don’t know why did Atul say we can’t. Anyways thank you for your concern.
Regards
Shafeen-
April 16, 2016 at 2:39 pm #37255nagesh kuknoorParticipant
Hi Shafeen,
Atul was right we cannot sweep data rate. we have to set bit rate as function in script mode if we wish to use two bit rates.
Regards -
April 16, 2016 at 3:31 pm #37271shafeen al yasinParticipant
Hi Nagesh
Why is not possible to sweep the bit rate? I have not used it myself but i shall try your suggestion. Can you also explain a bit more?Regards
Shafeen
-
-
-
April 15, 2016 at 1:37 am #36839Manoj KumarParticipant
Hi Shafeen,
As already discussed by other forum members I believe that twe are not able to sweep the bit rate although we can sweep every other parameter.. Hope this helps.. Also go through the link
All the best..Regards
-
April 16, 2016 at 3:36 pm #37274shafeen al yasinParticipant
Hi manoj
Thank you so much for the help i appreciate your concern.
Regards
Shafeen
-
-
April 15, 2016 at 12:59 pm #36922Domail SinghParticipant
Hello Shafeen,
i think the links provided by the forum members are very helpful to you. Hope you will get desired results. All the Best.
Regards
Domail-
April 16, 2016 at 3:38 pm #37276shafeen al yasinParticipant
Hi Domail,
Thank you for your concern.Regards
Shafeen-
April 17, 2016 at 1:49 pm #37533Domail SinghParticipant
Hi Shafeen
You are welcome.Regards
Domail
-
-
-
April 16, 2016 at 5:04 am #37135jyoti rainaSpectator
hi shafeen mam..
i also had this doubt but optiwave pdf helped a lot in understanding..you should also visit the link..
it shall help you..with regards
jyoti-
April 16, 2016 at 3:40 pm #37277shafeen al yasinParticipant
Hello Jyoti
Thank you and i surely will check it.
Regards
Shafeen
-
-
April 16, 2016 at 5:07 am #37137gaurav rajputParticipant
Hi Jyoti,
Can you please specify the link… I will be grateful…
Regards
-
April 16, 2016 at 3:41 pm #37278shafeen al yasinParticipant
Hi Gaurav,
Thank you anywaysRegards
Shafeen
-
-
April 16, 2016 at 5:18 am #37147jyoti rainaSpectator
hi gaurav sir..
the link mentioned by atul sir in above reply.. -
April 16, 2016 at 5:24 am #37152gaurav rajputParticipant
Hi Jyoti,
Thanks.. I have already had a look.. It indeed is helpful…
Regards
-
April 16, 2016 at 3:43 pm #37280shafeen al yasinParticipant
Hi all
Thank you for your much needed help.Regards
Shafeen -
April 16, 2016 at 3:46 pm #37283Ankita SharmaParticipant
Hi Shafeen,
You are welcome.. Hope you got the desired help on the forum…
Regards
ANKITA-
April 16, 2016 at 4:01 pm #37293shafeen al yasinParticipant
hi Ankita.
Thank you.Regards
Shafeen
-
-
April 16, 2016 at 4:05 pm #37296Manoj KumarParticipant
Hi Shafeen,
You are welcome..
Regards
-
April 17, 2016 at 2:33 pm #37555deepak jhaParticipant
Hi Shafeen,
Hope you got the desired information on the forum as discussions on a particular topic help us resolve our queries faster…
Regards
layout
-
April 17, 2016 at 5:58 pm #37704shafeen al yasinParticipant
Hi
Thanks a lot for your concern.Regards
Shafeen
-
-
April 17, 2016 at 3:11 pm #37577Domail SinghParticipant
Hi All
I think she got her this issue resolved. No point of discussing it again.Thank you
Regards-
April 17, 2016 at 6:00 pm #37706shafeen al yasinParticipant
Hi Domail,
Thank for your concern. yes it got solved and i appreciate all for that.Regards
Shafeen
-
-
April 17, 2016 at 3:26 pm #37587deepak jhaParticipant
Hi Domail Singh,
I agree there is no point discussing this issue now..
Regards
-
April 17, 2016 at 3:44 pm #37621Domail SinghParticipant
Yes there is not. I hope the topic is closed now.
Thank you.
-
-
April 17, 2016 at 3:49 pm #37624deepak jhaParticipant
Hi Yogita,
Please don’t respond on the forum yet as your comments are not visible… Wait for some time…
Regards
-
April 17, 2016 at 4:08 pm #37639Domail SinghParticipant
Hi All
I too Agree with Deepak on this. I hope they understand.Regards
Domail
-
-
April 17, 2016 at 3:58 pm #37631Manoj KumarParticipant
Hi Yogita,
I agree with Deepak here…Please wait for some time..
Regards
-
April 17, 2016 at 6:02 pm #37707shafeen al yasinParticipant
Hi All,
Thank you all for your efforts. I appreciate your efforts.
Regards
Shafeen -
April 18, 2016 at 12:26 am #37727Rahul TiwariParticipant
Hi Yogita,
I also agree with Deepak and Manoj here…Please wait for some time..
Regards
Rahul Tiwari -
April 18, 2016 at 12:29 am #37728Rahul TiwariParticipant
Hi Shafeen,
You are welcome…
Regards
Rahul Tiwari -
April 18, 2016 at 3:12 am #37740Kanwarjeet SinghParticipant
Hello Shafeen,
Your query about sweep mode may have been solved but i think it has helped me too. I had no idea about sweeping parameters. Anyway thank you for putting forth such inquiries.Regards
Kanwarjeet
-
-
AuthorPosts
- You must be logged in to reply to this topic.