SQRT Script

Home › Forums › GENERAL › SQRT Script

Viewing 2 reply threads
  • Author
    Posts
    • July 26, 2021 at 6:33 am #79709
      Iqbal Hidayat`
      Member

      hello, does anyone know about the matlab script used in matlab components using the square module?

    • July 29, 2021 at 11:41 am #80241
      Ahmad Atieh
      Moderator

      Dear Iqbal,
      you need to write the Matlab code for the SQRT functionality and load it to the Matlab component in OptiSystem. It should be easy. The incoming signal needs to be read by the Matlab code, process then pass it to the output port of the Matlab component. There are few examples in OptiSystem Example Library about the commands used for that located at the following link.
      C:UsersUSER NAMEDocumentsOptiSystem 18.0 SamplesSoftware interworkingMATLAB co-simulation
      Regards,
      Ahmad

    • July 29, 2021 at 11:41 am #82845
      Ahmad Atieh
      Moderator

      Dear Iqbal,
      you need to write the Matlab code for the SQRT functionality and load it to the Matlab component in OptiSystem. It should be easy. The incoming signal needs to be read by the Matlab code, process then pass it to the output port of the Matlab component. There are few examples in OptiSystem Example Library about the commands used for that located at the following link.
      C:UsersUSER NAMEDocumentsOptiSystem 18.0 SamplesSoftware interworkingMATLAB co-simulation
      Regards,
      Ahmad

  • Author
    Posts
Viewing 2 reply threads
  • You must be logged in to reply to this topic.