- This topic has 9 replies, 5 voices, and was last updated 9 years ago by
Naazira Badar.
-
AuthorPosts
-
-
February 15, 2016 at 2:35 am #29721
Leeba Babu
Participantcan anyone help me out with how to set up a RZ-OOK modulator in optisystem. I need rz-ook signals as input signals for my paper.
-
February 15, 2016 at 4:54 am #29726
alistu
ParticipantHi Leeba,
Please consider the screen shot that I have attached which shows a NRZ-OOK system. The Pseudo random bit sequence generator is connected to the NRZ pulse generator (ignoring the fork). You can have a RZ-OOK system by simply replacing the NRZ pulse generation component by a RZ component. Please see if it helps.
Regards
-
February 15, 2016 at 5:07 am #29730
Leeba Babu
ParticipantOk. Thnks a lot alistu. So it means that by giving a cw signal and pulse signals as inputs to MZM will generated OOK signals?
-
February 15, 2016 at 5:24 am #29732
alistu
ParticipantYou’re welcome Leeba. The attached screen shot is from a paper named “A Chromatic Dispersion Compensator for On-Off Shift Keying (OOK) Modulation Format by Mid-span Spectral Inversion” by Ni Lar Win, in which OptiSystem was used. So I believe correct results can be expected by implementing in the same way.
-
-
March 7, 2016 at 11:58 pm #31809
Ranjeet Kumar
ParticipantHi Leeba,
It is very simple to design RZ and NRZ modulation schemes in optisystem.
PBRS is connected to RZ pulse generator and it modualtes laser frequency as carrier wave using MZ modulator. -
March 11, 2016 at 5:20 am #32458
Leeba Babu
ParticipantThanks Ranjeet.
-
March 15, 2016 at 2:35 pm #32896
Naazira Badar
ParticipantHi Leebu Babu.
By default, when you use the PRBS as a carrier, it is OOK modulation only.
RZ and NRZ are the formats of the signal you employ while converting the binary PRBS to electrical form before giving as one of the inputs to the MZM. The other input would ofcourse come from the CW LASER source.
So, like most of the people mentioned above, you need to use RZ pulse generator to convert PRBS to RZ electrical format and hence the resultant modulated signal after MZM would be RZ-OOK. Hope I am clear.Regards.
-
March 15, 2016 at 2:43 pm #32898
SAHIL SINGH
ParticipantHI Alistu and Ranjeet…
Indeed the information provided by you is very helpful.. Thanks for your efforts
Regards
Sahil Singh
-
March 16, 2016 at 2:09 am #32932
Leeba Babu
ParticipantThanks a lot Naazira for the information. I will implement as said above.
-
March 16, 2016 at 5:33 am #32939
Naazira Badar
ParticipantHi Leeba..
You are welcome. All the best.
Regards.
-
-
AuthorPosts
- You must be logged in to reply to this topic.