Home Forums SYSTEM Re-Creating Tutorial

Re-Creating Tutorial

Profile Photo
(joined April 2015)
Participant

I’m new to Optiwave, so this may be an obvious question.

For my first project, I’m interested in doing something very similar to the set-up shown in Figure 1 of the “<a href=”http://optiwave.com/resources/applications-resources/optical-system-effects-of-group-velocity-dispersion-gvd-on-gaussian-pulse-propagation/&#8221; title=” Effects of Group Velocity Dispersion (GVD) on Gaussian Pulse Propagation”></a>. Is there anywhere that I can find that schematic to modify for my project?

Thanks.

Responses (2):

    • #19440
      Profile Photo
      Josh Weber
      Participant

      I’m new to Optiwave, so this may be an obvious question.

      For my first project, I’m interested in doing something very similar to the set-up shown in Figure 1 of the “<a href=”http://optiwave.com/resources/applications-resources/optical-system-effects-of-group-velocity-dispersion-gvd-on-gaussian-pulse-propagation/&#8221; title=” Effects of Group Velocity Dispersion (GVD) on Gaussian Pulse Propagation”></a>. Is there anywhere that I can find that schematic to modify for my project?

      Thanks.

    • #19498
      Profile Photo
      Damian Marek
      Participant

      You can find the example file in the OptiSystem Samples folder, found in your documents, under the sub folder Fiber Analysis and Design. There are a couple different examples there, but the one you are interested in is:

      GVD Gaussian pulse propagation.osd

      Regards

      +1
    • #19505
      Profile Photo
      Josh Weber
      Participant

      Thank you for your reply, Damian. I found the example file.

      The problem was that I hadn’t realized that the samples were a separate installation from the program. Once I installed them, I found the file just where you indicated.

      Thanks again for your help!

      Josh

Login You must be logged in to reply to this topic.