Problem with PPM decoder in OWC channel
I am trying to simulate an OWC system using PPM modulation. I have problem with the PPM Decoder at the receiver side. Please take a look at my project attached below. My bit sequence is correct in the transmitter and in the receiver but the BER Analyzer has strange results (Min BER = 1, other factors = 0) when crossing the canal and its very illogical how can i get BER of 10e-009 or Is there anything wrong with my simulation? Please help me out with this problem .
Thank you for your consideration.
Regards.
Responses (1):
-
I am trying to simulate an OWC system using PPM modulation. I have problem with the PPM Decoder at the receiver side. Please take a look at my project attached below. My bit sequence is correct in the transmitter and in the receiver but the BER Analyzer has strange results (Min BER = 1, other factors = 0) when crossing the canal and its very illogical how can i get BER of 10e-009 or Is there anything wrong with my simulation? Please help me out with this problem .
Thank you for your consideration.
Regards. -
Dear Safi,
please note that you can’t attach OptiSystem .osd files to the post on the forum. Please email me the project as zip file to ahmad.atieh@optiwave.com and let me know the version of OptiSystem that you use.
Regards,
Ahmad
Login You must be logged in to reply to this topic.