How to use two difference bitrate.

Home › Forums › SYSTEM › How to use two difference bitrate.

Viewing 5 reply threads
  • Author
    Posts
    • June 17, 2014 at 6:55 am #12040
      Seungho Kim
      Participant

      Hi, I want to simulate my system using two difference bitrate.

      I need to set bitrate1 – 1.5Gbps, bitrate2 – 10Mbps.

      Generally, two difference bitrate cannot be allowed in one layout.

      How do I put 2 difference bitrate in one layer?

      Is there any other solution?

    • June 17, 2014 at 9:05 am #12052
      Alessandro Festa
      Participant

      Hi Seungho, I tipically add a Global Parameter for the second BitRate. If the two bitrates are very different (like 100G and 10G), you have to keep an eye on the Sample Rate to avoid that one of the two has not enough rate for sampling or alasing may happen.

      Hope this helps,

      Alessandro

    • November 13, 2014 at 3:41 pm #15536
      Heitor Galvao
      Participant

      If I understand you can duplicate the layout, this layout you doubled will have the same components of the first and the only thing you change is going in global parameters and changing the bit rate

      Attachments:

      1. Capturar.jpg

      +2
      • November 13, 2014 at 3:43 pm #15540
        Heitor Galvao
        Participant

        In the same arquivo.osd you’ll have three equal projects with the only difference in bit rate

    • November 13, 2014 at 7:09 pm #15561
      Ravil
      Participant

      I’m not sure about system you are trying to model but you may also consider 2 different modulators…

    • November 13, 2014 at 7:10 pm #15562
      Ravil
      Participant

      But Heitor’s method is the easiest one!

    • November 15, 2014 at 12:12 am #15613
      siva rama krishna
      Participant

      Using “duplicate layout” is the best option.

  • Author
    Posts
Viewing 5 reply threads
  • You must be logged in to reply to this topic.