Home Forums FIBER generate a Gaussian shape picosecond optical pulse

Viewing 1 reply thread
  • Author
    Posts
    • #69099
      mohamed abuhelala
      Participant

      hello all,

      not familiar with Optisystem. I would like to generate a picosecond optical pulse (12ps) with a repetition rate of 2.5Ghz (every 400ps). i find not it straightforward task to do as time widow and bit rate are somehow linked to each other every time I alter one of them.

      I would greatly appreciate any suggestions,

      best regards,

      M

    • #69101
      Ahmad Atieh
      Moderator

      Dear Mohamed,
      please refer to Figure 1 in the Global Parameters Reference Guide document that you may access it from the following link for guidance.
      You could set the proper parameters for the samples/bit, sequence length which will affect the time window and frequency window as explained in the reference guide.
      If you’d like to get arbitrary pulses (On/Off) then use PRBS generator component, else use the User-defined bit sequence generator and choose Alternating zeros and ones.
      C:\Program Files\Optiwave Software\OptiSystem 17\documentation

      Regards,
      Ahmad

Viewing 1 reply thread
  • You must be logged in to reply to this topic.