Connect Matlab with Optiwave

[Khadija OmranParticipant]

Hi
i want to link optiwave with matlab ,, i have design 4QAM with high dispersion when increase the length of fiber , i want handling this dispersion by using constant modulus algorithm in matlab (m file) ,
the project and the matlab file in the attachments
can help me to connect and get the pure constellation
and thanks 🙂

Attachments:

1. Coherent-4-QAM.osd

[Khadija OmranParticipant]

this the m file in matlab

Attachments:

1. cmaadaptivefilter.m

+1

[alistuParticipant]

Hi Khadija,

The Matlab codes have not obviously been written for OptiSystem co-simulation. So I suggest you go through the Matlab co-simulation tutorials and videos to understand how the format of the vectors generated in OptiSystem should be like. Then you would be able to modify the codes accordingly.

Regards

+1

[Khadija OmranParticipant]

thank alistu
I saw it but i am not understand 🙂

[alistuParticipant]

If you have studied the three pdf tutorials along with the two videos regarding Matlab co-simulation with OptiSystem and still have problem, I suggest you ask here. But first you’d bettewr place the Matlab component in the system where it should be used and define input and output ports number and type.

+1