Home Forums SYSTEM About system configuration

About system configuration

Profile Photo
(joined December 2019)
Participant

Hello
Tell us about optisystem
I want to create a file-like structure, but I don’t understand
This system uses pulsed light to determine the sensor unit based on time (distance).
I don’t know especially pulse and coupler settings

Attachments:

Responses (2):

    • #62794
      Profile Photo
      YU IRITA
      Participant

      Hello
      Tell us about optisystem
      I want to create a file-like structure, but I don’t understand
      This system uses pulsed light to determine the sensor unit based on time (distance).
      I don’t know especially pulse and coupler settings

      Attachments:
    • #63027
      Profile Photo
      Joshua Donald
      Participant

      Hi Yu,

      Would you be able to elaborate on what you mean by wanting to create a file like structure?

      For the diagram you provided I would consider using a bidirectional coupler since you require a coupler with 3 outputs. The setting for either component can be seen by double clicking the component. If you know what frequency is required you can put that value into the frequency value of the optical Gaussian pulse generator. So for example if you are modelling a lidar sensor you might choose a frequency of 193thz or 316thz. If you chose the coupler to be wavelength dependent you should adjust the wavelength of the coupler according to the frequency of the pulse selected.

      Best,
      Josh

      Attachments:
    • #63167
      Profile Photo
      YU IRITA
      Participant

      Thank you for answering.
      I want to distinguish between two sensors in time using pulsed light.
      Change the length of the optical fiber between the coupler and the sensor.
      I want to make a distinction by looking at the signal of the time difference.
      The sensor unit uses MATLAB components.
      I’m sorry for poor English and explanation.

Login You must be logged in to reply to this topic.