- This topic has 8 replies, 7 voices, and was last updated 8 years, 9 months ago by
hosam hussen.
-
AuthorPosts
-
-
March 9, 2016 at 7:10 am #31992
karthikeyan ravi
Participanthere i upload 16-qam CO-OFDM system. but i tried to put 64-qam and 256-qam. i did not produce significant result. pls provide useful post to me.
thanking you all -
March 9, 2016 at 9:53 am #32063
aasif bashir dar
Participanthi zulkarnain,
please read the query of karthikan ravi, he has attached .osd file and he he needs help in that regards, i think he is well aware of theoretical aspects of the QAM and OFDM.i have not acess to software this time but i will try to fiqure that soon about the problem in your .osd file
with regards
-
March 9, 2016 at 12:15 pm #32105
Aabid Baba
Participanthello ravi,
well i can’t access your osd file right now but could you please tell that do you vary any of the parameters of any component, the symbol rate, bandwidth of the filters or any other component while changing your modulation schemes???
I would want you to look at the link that i am posting below. You might find this link helpful.regards
-
March 9, 2016 at 12:19 pm #32108
ZULKARNAIN
ParticipantHi aasif..
Actually i have access to software only during lab hours. That is why i uploaded some theoretical posts which i find useful for the topic.
Hopefully i will look into this tommorrow.
regards -
March 9, 2016 at 1:31 pm #32140
Ranjeet Kumar
ParticipantHi ravi,
To make 64 and 256 QAM OFDM modulation first you have take 6 bits(2^6=64) and 8 bits(2^8=256) in QAM modulator and then proceed further and make necessary changes to have expected results.-
March 11, 2016 at 12:24 am #32422
FAYIQA NAQSHBANDI
Spectatorhi all,
ranjeet is right. You need take to first take necessary parameters into consideration like number of bits in modulator etc before moving from 16-QAM to 64-QAM or 256- QAM. There are few variation in parameters required. I will attach an osd file which would definitely give u an idea hw to proceed and make necessary changes in ur network.
thanks and regards
-
-
March 14, 2016 at 2:53 am #32694
karthikeyan ravi
Participanthi every one,
thanks for the reply. i tried to change the parameter like 6 and 8 bit per symbol at the QAM modulator and demodulator. that file 16QAM modulator MIN BER value quite well at the datarate upto 40Gb/s the distance maximum 100km with 10GHz carrier frequency. but 64 & 256QAM MIN BER cant found margin value.pls post necessary one.
-
June 16, 2016 at 11:06 am #40708
karthikeyan ravi
Participanthi………. everyone, if anyone idea about 64&256 qam modulation parameter. i attached already, i need suitable reply for that, i did not produce significant result. pls provide useful post to me.
thanking you all -
June 17, 2016 at 9:57 am #40711
hosam hussen
Participanti have the same problem
-
July 6, 2022 at 6:29 am #80797
rawa muayad mahmood
ParticipantCan anyone help with the setting of 64QAM? how can I calculate the BER from the 46QAM system? I try the test BER set but still did not get the results.
-
July 6, 2022 at 6:29 am #83401
rawa muayad mahmood
ParticipantCan anyone help with the setting of 64QAM? how can I calculate the BER from the 46QAM system? I try the test BER set but still did not get the results.
-
-
AuthorPosts
- You must be logged in to reply to this topic.