Home › Forums › SYSTEM › How to create a channel model for a bathymetric LiDAR › Reply To: How to create a channel model for a bathymetric LiDAR
![Profile Photo](https://optiwave.com/wp-content/uploads/avatars/23679/59945663b4165-bpfull.jpg)
Dear Giacomo,
My recommendation for your system is to use the FSO Channel, then a Reflector Bidirectional component that addresses the reflection from the water surface, then another FSO Channel component to go back to the UAV. If you will assume the signal has to go through the water surface and reflect from seafloor or other layers, then using the NLOS Underwater Channel component would be inaccurate because the model is assuming the light is propagated within the water and reflected from the water surface to receiver in the water.
We are introducing a new component that has roughness feature which could handle the wavy feature of the sea surface in Mar2024.
Regards,
Ahmad
-
This reply was modified 6 months ago by
Ahmad Atieh.
Categories
- All
-
Knowledge
Contains a detailed Q&A knowledge base. -
General
All non-technical questions. -
System
Optical system design and analysis. -
Instrument
Communicate and control different kinds of instruments. -
SPICE
Opto-electronic circuit design. -
FDTD
Finite-Difference Time-Domain simulation. -
BPM
Beam Propagation Method analysis and design. -
Grating
Fiber optic grating simulation. -
Fiber
Optical fiber design and characterization. -
Exchange
Users can exchange design files.
(Matlab, C++, etc.)