Home › Forums › SYSTEM › Eye Diagram for rz › Reply To: Eye Diagram for rz
October 2, 2015 at 7:08 am
#25661

Hi Shahbaz;
The acceptance of Eye diagram shape depends on the achieved Q-factor, so in your attached photo Q=22 which must be at least equals to 6.
Since you achive high value for Q-factor, the obtained eye diagram is accepted.
We should mention here that eye differs in the same project according to parameters of compentants such as Laser power and fiber length… so these considerations should be taken also when you design optical system.
Regards,
Categories
- All
-
Knowledge
Contains a detailed Q&A knowledge base. -
General
All non-technical questions. -
System
Optical system design and analysis. -
Instrument
Communicate and control different kinds of instruments. -
SPICE
Opto-electronic circuit design. -
FDTD
Finite-Difference Time-Domain simulation. -
BPM
Beam Propagation Method analysis and design. -
Grating
Fiber optic grating simulation. -
Fiber
Optical fiber design and characterization. -
Exchange
Users can exchange design files.
(Matlab, C++, etc.)