Home › Forums › SYSTEM › over comming fibre cromatic dispersion effects › Reply To: over comming fibre cromatic dispersion effects
This is the abstract of the paper:
Overcoming chromatic-dispersion effects in fiber-wireless systems incorporating external modulators (Citations: 211)
Graham H. Smith, Dalma Novak, Zaheer Ahmed
Abstract:
We demonstrate two techniques to reduce the effects of fiber chromatic dispersion in fiber-wireless systems incorporating external modulators. We theoretically and experimentally show that the achievable link distance can be increased by varying the chirp parameter of the modulator to give large negative chirp using a dual-electrode Mach-Zehnder modulator (MZM) biased at quadrature. In addition, we show that dispersion can be almost totally overcome by implementing a simple method using the dual-electrode MZM to generate an optical carrier with single sideband (SSB) modulation. We demonstrate the transmission of a 51.8-Mb/s pseudorandom bit sequence (PRBS) at 12 GHz over 80 km of standard single-mode fiber using the SSB generator and measure a bit-error-rate (BER) power penalty due to fiber dispersion of less than 0.5 dB for a BER equal to 10-9
Journal: IEEE Transactions on Microwave Theory and Techniques – IEEE TRANS MICROWAVE THEORY , vol. 45, no. 8, pp. 1410-1415, 1997
Categories
- All
-
Knowledge
Contains a detailed Q&A knowledge base. -
General
All non-technical questions. -
System
Optical system design and analysis. -
Instrument
Communicate and control different kinds of instruments. -
SPICE
Opto-electronic circuit design. -
FDTD
Finite-Difference Time-Domain simulation. -
BPM
Beam Propagation Method analysis and design. -
Grating
Fiber optic grating simulation. -
Fiber
Optical fiber design and characterization. -
Exchange
Users can exchange design files.
(Matlab, C++, etc.)