@Tech Support
1. What would be the value of Vpi for LiNb MZM ??
2. WIll u elaborate how to use these parameters (as in above Question) for LiNb mach zehender modulator (like Switching RF voltage, Switching Bias voltage, Bias voltage 1, Bias Voltage 2 etc) especially when using external modulation with RF source as providing modulating signal, DC generator for biasing and CW laser source as carrier.
Kindly tell me how to relate these parameters with sine generator and Dc generator.
3. Also tell me how u relate these parameters (as u have given in above attached file) for three different cases i.e. Peak Operating point, Null Operating point and Quadrature operating point.
e.g
a. Quadrature operating point
Bias (Vdc=Vpi); V1-V2=Vpi/2=2
Vpi=4;Vrf=4
Max Voltage delta is 4(Vpi)
b. Peak operating point
Bias (Vdc=0); V1-V2=0
Vpi=4; Vrf=4
Max Voltage delta is 4(Vpi)
c. Null operating point
Bias (Vdc=Vpi); V1-V2=Vpi=4
Vpi=4;Vrf=4
Max Voltage delta is 8(2Vpi)
I want to know how u relate all these above parameters with Sine generator and MZM modulato?
4. Further i want to know how and why u have chosen all these values ?? and how these values and parameters affect the operation of all three different operation.
Please help me out, i really need assistance.
I wil be very thakful to u for ur help and assistance.
Best Regards
Best Wishes