Webinar: EXFO LTB-8/12 Automation and Remote Testing Using OptiInstrument 4.0 Software
Webinar: EXFO LTB-8/12 Automation and Remote Testing Using OptiInstrument 4.0 Software Join Optiwave for an informative & instructional webinar on Optiwave’s recently released OptiInstrument 4.0 software. OptiInstrument tool communicates and controls physically connected or remotely connected instruments through standard interfaces such as TCP/IP, USP, GPIB, or serial port (RS232/RS485). The software GUI, Key Features,…
Webinar: Probabilistic Amplitude Shaping for QAM and PAM Modulated Signals
Webinar: Probabilistic Amplitude Shaping for QAM and PAM Modulated Signals 8 June 2022, 10:00 – 11:00 – Eastern Daylight Time Various schemes have been used in the field to address the ever-increasing demands of exploding information transmission requirements to support different services including social networking, video conferencing, multimedia, etc. Probabilistic amplitude shaping (PAS), a form…
OIDA Sponsored Webinar: Photonic Crystal Design Within the OptiFDTD Environment
OIDA Sponsored Webinar: Photonic Crystal Design Within the OptiFDTD Environment 18 August 2021, 10:00 – 11:00 – Eastern Daylight Time The webinar will be exploring the design and analysis functionality of the OptiFDTD product as applied to photonic crystal based structures. There will be two primary objectives:• Examination of the fundamental crystal structure in terms…
OIDA Sponsored Webinar: Multicore SM and MM Fibers with Trenches and Air-Hole Assisted
OIDA Sponsored Webinar: Multicore SM and MM Fibers with Trenches and Air-Hole Assisted 28 July 2021, 10:00 – 11:00 – Eastern Daylight Time (UTC – 04:00) Optiwave Systems Inc. offers software tools that can be used to simulate & analyze single-mode and multimode multicore fibers with/without trenches and air-hole assisted structures. The supported modes in…
OptiInstrument Software for Instrument Control and Automation PHOTONICS+2021
OptiInstrument Software for Instrument Control and Automation PHOTONICS+2021 The presentation prepared for the inaugural PHOTONICS+ is available on this link and talks about OptiInstrument Software for Instrument Control and Automation. OPTIWAVE is the emerging leader in the development of innovative software tools for the design, simulation, and optimization of components, links, systems and networks for the…
PIC circuit optimization using compact models with physical parameters
PIC circuit optimization using compact models with physical parameters Thursday 8th July 2021 10:00 ET • 15:00 BST Register for Webinar Optiwave offers a variety of simulation tools capable of supporting photonic integrated circuit design. OptiSPICE plugin is a photonics model library that can be integrated into industry-standard EDA tools. It is designed to…
Join us at CLEO 2021
On May 14th, 2021, Dr. Ahmad Atieh will provide the talk at CLEO 2021. You are welcome to join us. Digital Predistortion Algorithm of Advance Coherent Modulation Schemes Enabling Radio over Fiber for Access Networks Session Title: A&TTR on Millimeter Wave Over Fiber for Fronthauling of 5G and Beyond Session Type: A&T Topical Review Date: 14-May-2021…
Join us at the AngelTech Live III
Join us at the AngelTech Live III on 12th April 2021 Registration is open and free Here The drive to miniaturization, battery power, high speed, sensing, imaging, and advanced computational processing means that photonic integration will grow, and grow quickly. Cramming discrete, individual components in a small box is going away, in fact, just like…
Webinar: Multicore Fiber Design & Analysis
Optiwave Systems Inc. offers software tools to simulate & analyze single-mode and multimode multicore fibers with/without trenches and air-hole assisted structures. The supported modes in the structure are accurately obtained by modal analysis in OptiMode software. Then the coupling coefficients between the modes in the same core or different cores are calculated and the crosstalk…
2nd OIDA Technology Showcase
Optiwave proudly presented our latest progress in the OptiInstrument, “OptiInstrument Smart Logic and Conditioning Control of instruments for Automated Testing and Characterization.” Everything you need to catch up or share with your team is here.
