Resources

Nano Photonic Imager

This example demonstrates the operation of a nanophotonic coherent imager (4 x 4 pixels)

Webinar Week – 20 Sessions – 100% Free!

June 1, 2017

Optiwave is putting together a full week of free software training for our customers & prospective users. We will cover material from basic principles & simulation setup to advanced applications & co-simulation capabilities.

Photonics West 2018: Booth #2230

January 31 - February 2

SPIE Photonics West Exhibition, 30 January to 1 February 2018, is the premier photonics and laser event. Bigger booths, more products, and more to see in 2018. The Photonics West exhibition continues to be the flagship event for the photonics industry.

Signal Quality Ratios

When designing or analyzing the performance of an analog or digital link, the following signal metrics are commonly used…

Optical Receiver Analysis (PIN-TIA-LA)

The overall performance of a point-to-point optical communication link is normally defined based on the minimum average optical power, measured at the input to the optical receiver…

Matched Filter Analysis

A matched filter is an ideal filter which acts upon a received signal so as to maximize its signal to noise ratio (SNR). Under conditions of additive white Gaussian noise, the SNR…

Digital Modulation Analysis (PSK)

Digital modulation systems are used to transmit digital (quantized) information over a medium such as air or optical fiber. Transmission is achieved by mapping the information…

MATLAB Data Formats

This application note will describe the Matlab Data Formats that are available within OptiSystem.

ECOC 2017: Booth #275

September 18-20

The European Conference on Optical Communication (ECOC) is the largest conference on optical communication in Europe and one of the largest and most prestigious events in this field worldwide.

OptiSystem Matlab Data Formats

The data structure for all input and output ports and all variables declared within the MATLAB m-file can be viewed from the MATLAB workspace To access the workspace, first select Load MATLAB from the MATLAB Component and select OK. This action pre-loads MATLAB (it will stay open unless it is manually closed) After running a…