OPTICAL SENSORS

Hello Umer Ashraf Wani,

What do you mean by valid arguments?

Hi umer ashraf wani,
Which type of optical sensors do you want to design?
And for what purpose you want to design?
Please elaborate your design aim and applications.
As far as i know i don’t design optical sensors in optisystem.
But i think optiwave would provide an option to design optical sensors.
As in case of optical sensors, fibers have many uses in remote sensing.
Depending on the application, fiber may be used because of its small size.
by sensing the time delay as light passes along the fiber through each sensor.
Time delay can be determined using a device such as an optical time-domain reflectometer.
So, we have to know the applications too.

Thanks

Hello Umer,
As far as i know we can design optical sensors in Optisystem making the use of fiber bragg grating. I would suggest you to refer to the link where there has been briefly explained how we can make use of gratings to ensure design of an optical sensor.

Sensors

I hope this would give you some idea about how we do it here. And yes what kind of sensor you want to implement ? temperature or pressure sensor or for that matter any other sensor?
Regards

Hello Umer,
Thank you for sharing it. Well i am not sure about how to design it but surely i know that Fiber Bragg gratings are used to design temperature as well as pressure sensors. I think humidity sensor will be just extension of temperature sensor. Try going through the link i just provided it gives you brief idea about designing a simple sensor. I suppose you may have to use MATLAB for doing it though i am not sure but in my opinion MATLAB is going to play some role for the design of the sensor you are desiring for. I hope it would help you to some extent. Thanking you.

Regards

Sure. You are welcome.
All the best i hope you succeed.

Regards

Hi Umer,
First we should know about advantages of optical sensors to mechanical sensors.
What is significance of its use and also its application.
Fiber-optic sensing is an excellent solution to transmission loss and susceptibility to electromagnetic interference (noise).
a fiber-optic sensor works by modulating one or more properties of a propagating light wave,
including intensity, phase, polarization, and frequency, in response to the environmental
parameter being measured. Extrinsic (hybrid) optical sensors use the fiber only as a
mechanism to transmit light to and from a sensing element, while intrinsic optical sensors
use the optical fiber itself as the sensing element.
At the core of optical sensing technology is the optical fiber – a thin strand of glass that transmits light within its core.

Hi Umer,
As Aabid sir discussed about FBG sensors.
I want to share some information about FBG sensors, which is One of the most commonly used and broadly deployed optical sensors,
which reflects a wavelength of light that shifts in response to variations in temperature and/or strain.
FBGs are constructed by using holographic interference or a phase mask to expose a short length of
photosensitive fiber to a periodic distribution of light intensity. The refractive index of the fiber
is permanently altered according to the intensity of light it is exposed to. The resulting periodic
variation in the refractive index is called a fiber Bragg grating.

When a broad-spectrum light beam is sent to an FBG, reflections from each segment of
alternating refractive index interfere constructively only for a specific wavelength of light,
called the Bragg wavelength. It has various advantages like FBG strain gages are
available with a variety of form factors and mounting options including epoxy, weldable, bolt-on, and embedded.

Hi,
Now the most important point is benefits of FBG Optical Sensing :
These are are nonconductive, electrically passive, and immune to EMI-induced noise.
No/ little loss in signal integrity on interaction with a high-power tunable laser enables measurements over long distances.

Unlike electrical sensing systems, each optical channel can measure dozens of FBG sensors,
greatly reducing the size, weight, and complexity of the measurement system.

Optical sensing is ideal for applications electrical sensors such as foil strain gages, thermocouples, and vibrating wires have proven ineffective or tough to use due to difficult environmental conditions and/or long distances.

Thanks,
Rajguru

You are most welcome umer ashraf wani.
I will keep trying to post valuable information .

Hello Umer,

As far as optical sensors are concerned i seem to agree with Aabid Baba. Surely we can design optical sensors in Optisystem making the use of fiber bragg grating. I would suggest you to refer to the link provided by Aabid Baba. It nicely & briefly explained how we can make use of gratings to ensure design of an optical sensor.

Sensors

I hope this is helpful.

Regards

Burhan

Hello.

As mentioned by other forum members that we can design optical sensors in Optisystem making the use of fiber bragg grating. I would suggest you to refer to the link provided by Aabid Baba.
FBG sensors, which is one of the most commonly used and broadly deployed optical sensors,which reflects a wavelength of light that shifts in response to variations in temperature and/or strain. FBGs are constructed by using holographic interference or a phase mask to expose a short length of photosensitive fiber to a periodic distribution of light intensity. The refractive index of the fiber is permanently altered according to the intensity of light it is exposed to. The resulting periodic variation in the refractive index is called a fiber Bragg grating. When a broad-spectrum light beam is sent to an FBG, reflections from eachWhenent of alternating refractive index interfere constructively only for a specificalternatingof light called the Bragg wavelength.It nicely & briefly explained how we can make use of gratings to ensure design of an optical sensor.

Sensors

Thanks
Regards

sorry for the duplicate comment.
I apologise.

Thanks
Regards

Hello everyone,
Thank you for sharing such information. I appreciate your efforts. It is indeed very very helpful.
I have a query regarding these sensors. Do we have a mechanism by which we can design Bio sensors in optisystem. No doubt we are able to design optical sensors here but can we somehow translate the optical sensors into bio sensors. I would be glad if someone knows about it. Thanking you.
Regards