- This topic has 20 replies, 8 voices, and was last updated 8 years, 11 months ago by
Ashu verma.
-
AuthorPosts
-
-
July 30, 2015 at 1:18 am #22897
LALIT VERMA
ParticipantSir
how do i change the value of resistance in the pin diode.using the optisystem 13.
-
July 31, 2015 at 2:13 am #22940
Alessandro Festa
ParticipantHi Lalit, you mean in the PIN Photodiode Component? Which resistance do you need to change, load resistance?
-
July 31, 2015 at 3:33 am #22941
alistu
ParticipantHi Lalit,
I think the value 50 Ohms that has been assigned for the PIN photodetectors is more or less chosen due to same reason as why this value is used in mircowave communications. The physical explanation states something about light entering an area with a different refractive index that the area light has been in before and load resistance being calculated so. So it makes sense if there is no option for changing it in Optisystem.
-
July 31, 2015 at 3:35 am #22942
Alessandro Festa
ParticipantHi alitsu, I understand your point, but for example CATV applications use 75ohm impedance, so why cannot we change this value in Optisystem?
-
July 31, 2015 at 4:32 am #22944
alistu
ParticipantHi Alessandro, I think you have a point. After all, load resistance is there in the properties part. If its value cannot be changed, its current value should have better been mentioned in the help section so as not to raise a question as to whether or not it can be changed. Now it is somehow misleading.
-
-
July 31, 2015 at 5:57 am #22948
Alessandro Festa
ParticipantMaybe the possibility to change the load resistance will be added in future releases?
Damian: can you please give feedback on this point?Thanks,
Alessandro
-
July 31, 2015 at 10:24 am #22970
Damian Marek
ParticipantThe load resistance is used to calculate the thermal noise and also bandwidth of the PIN. If you set the thermal noise calculation to Calculated instead of Defined you will be able to modify its value.
-
July 31, 2015 at 10:47 am #22971
Alessandro Festa
ParticipantThanks Damian for clarifying this!
-
August 2, 2015 at 3:41 am #22991
Taiwo Ambali Abiola
ParticipantThanks Damia for the useful response
-
August 1, 2015 at 11:36 pm #22990
Ravil
ParticipantThank you very much for your clarification, Damian! It is a very useful for one of the questions that I had before but never had a chance to ask. Thanks again!
-
-
-
July 31, 2015 at 9:31 am #22965
Ashu verma
ParticipantHi Alessandro,I think optispice would be better to vary the resistance of photodetector.I am not sure about the change of resistance in optisystem 13.Thank you Lalit for your this question.Hope we see this function in future version of optisystm
-
August 1, 2015 at 10:47 am #22988
LALIT VERMA
ParticipantThanks and regards sir
To all of you. the replies cleared my problem. -
August 2, 2015 at 5:46 am #22992
Gurpreet Kaur
Participantis it possible to change resistance in ver7 of optisystem?
-
August 2, 2015 at 6:06 am #22993
alistu
ParticipantHi Gurpreet,
I don’t have access to version 7, but I think you can easily find out by doing what Damian mentioned and see if it can be changed or not.
Cheers!
-
August 2, 2015 at 2:35 pm #22998
Gurpreet Kaur
Participantthere is no such option of ‘calculated’ or ‘defined’ for thermal noise…
so any other way to do this?-
August 2, 2015 at 11:30 pm #23002
alistu
ParticipantUnfortunately, I don’t have access to Optisystem version 7. I am currently using version 13.0.3 trial. But I am curious to know. Do you happen to have any Optiwave links where I can download a trial of the v.7? As far as I know, the links related to older versions of Optisystem are replaced by the new version link.
-
-
August 3, 2015 at 1:36 am #23007
Gurpreet Kaur
Participanti cudnt findthe link for v7.
-
August 3, 2015 at 2:39 am #23009
Ashu verma
ParticipantHi Gurpreet first of all you cannot change the resistance value in optisystem 7.i couldnt found any options as directed by Damian.si it is clear for resistance variation you have to switch to latest version.Alisthu i dont think optisystem 7 is now you get over internet.however if you need urgently then someone may provide you over mail.Even i can if u need
-
August 3, 2015 at 6:43 am #23023
alistu
ParticipantThank you very much for helping Gurpreet with his problem. Also, I appreciate your offer to help, but I am not in an urgent need for the version7. I just wanted to find Gurpreet’s answer. Besides, I guess by going through the pdfs on “Optisystem new features” I can find more about the changes in the software, which I am curious about. Thanks again.
-
-
August 3, 2015 at 3:22 am #23014
Gurpreet Kaur
Participantok thank you samsung for the information…
-
August 4, 2015 at 2:03 am #23053
Ashu verma
ParticipantWelcome Gurpreet and Alisthu.In case you need let me know,but it is better to use latest one with more advsnced features and for fast processings.
-
-
AuthorPosts
- You must be logged in to reply to this topic.