- This topic has 7 replies, 3 voices, and was last updated 9 years ago by
abdollah gholami.
-
AuthorPosts
-
-
July 13, 2015 at 7:20 am #22364
abdollah gholami
ParticipantHi.
I need help in Save Spice Stimulus File in Optisystem. -
July 13, 2015 at 10:21 am #22381
Damian Marek
ParticipantI switched this to this to the OptiSPICE forum, but perhaps you mean an spice file in general? Can you elaborate about your specific problem? Are you trying to input an electrical signal into an Optical System or is this some type of problem cosimulating with OptiSPICE?
-
July 13, 2015 at 10:44 am #22385
Ashu verma
ParticipantHello Abdollah Gholami
Welcome to optisystem forum,I would suggest you to first go through the optiwave tutorials as there are a co-simulation option of the spice file with optisystem.You can save the file simply by save option.Then the different files with extension .sp etc appear on the location you saved file.You can use this files in optisystem co simulation spice component to use this in optisystem for further work.Visit the links i have given below for overview of optispice and working
https://optiwave.com/resources/latest-news/new-version-optispice-5-0/ -
July 13, 2015 at 4:10 pm #22396
abdollah gholami
ParticipantHi.
thank you for answering.
I want to save an electrical signal in my OptiSystem Project for further analyse ,in stl file format.
Now I understand my problem.
during simulation, from iteration 1 to 10 , this signal is Null(I connect an oscilloscope visualizer and see nothing! )
after iteration 11 oscilloscope visualizer shows that signal.
I guess my problem is because that Input signal of “Save Spice Stimulus File” cant be Null.
I think a trick to solve this problem!!!
I work with Optisystem 13.-
July 14, 2015 at 11:40 am #22417
Damian Marek
ParticipantYes I imagine a null signal would not be saved! Without seeing your project file I cannot tell why it would give a null signal, but if you have any other questions please let me know. I just tried a simple example project file and the STL file was saved correctly for me.
Regards
-
-
July 15, 2015 at 4:03 pm #22476
abdollah gholami
ParticipantHi. my project need a lot of time for simulating. but I send for you a Simple Project that can show you my real Problem.
My problem is that i must enable “Initial delay” in “signal” tab of “Layout Parameters”.if i enable “Initial delay”, i get error in “Save Spice Stimulus File”.
if i dont enable this option, data will be saved in stl format successfully but my output signal is not a valid output and also “MATLAB Component” will not run in Simulation.
I completely get confused!!!
I upload for you my simple project and a picture of “Initial delay” setting in my project.
-
July 16, 2015 at 8:40 am #22498
Damian Marek
ParticipantThis seems more like a bug now. You are trying to do some type of bidirectional simulation or feedback application?
-
-
July 16, 2015 at 1:43 pm #22512
abdollah gholami
ParticipantYes. my Project is simulation of a sensor system. this sensor send an optical signal through a bidirectional coupler and a bidirectional fiber and then reflect it from bidirectional reflector. I have written a Matlab code to extract Phase of received signal.
and I also want to save received signal in stl format or any format,that I can.
what does “Initial delay” exactly do and when must i enable this option?
-
-
AuthorPosts
- You must be logged in to reply to this topic.