Base
Full Name | sulaiman |
Organization | iug |
Job Title | no |
Country |
Forum Replies Created
![Profile Photo](https://optiwave.com/wp-content/uploads/avatars/887/015dabd02b0f08c3da6eebde0f1faeba-bpfull.jpg)
Hi Damian, could you pleas How can I get higher data rates?in up attachment
![Profile Photo](https://optiwave.com/wp-content/uploads/avatars/887/015dabd02b0f08c3da6eebde0f1faeba-bpfull.jpg)
Thanks Daiman, Here is my project attached (BER versus Data rate). You can see the BER deteriorates by increasing the data rate. How can I get higher data rates? Best regards.
Attachments:
![Profile Photo](https://optiwave.com/wp-content/uploads/avatars/887/015dabd02b0f08c3da6eebde0f1faeba-bpfull.jpg)
Thanks Daiman, Here is my project attached (BER versus Data rate). You can see the BER deteriorates by increasing the data rate. How can I get higher data rates? Best regards
![Profile Photo](https://optiwave.com/wp-content/uploads/avatars/887/015dabd02b0f08c3da6eebde0f1faeba-bpfull.jpg)
Thanks Damian, I have increased the sequence length but there was no improvement. When increasing the bit rate from 200 Mbps to 400 Mbps or more I got bad results . Also I got bad results when increasing the input power. Could you please help me with that. Many thanks
![Profile Photo](https://optiwave.com/wp-content/uploads/avatars/887/015dabd02b0f08c3da6eebde0f1faeba-bpfull.jpg)
my project is FE-OCDMA-7-Users.osd its a sample in the V13
![Profile Photo](https://optiwave.com/wp-content/uploads/avatars/887/015dabd02b0f08c3da6eebde0f1faeba-bpfull.jpg)
Hi Damian
could you pleas give attachment to solve the problem in FE-OCDMA-7Users. when the simulation run the results are good for usess1,3,4,5, and7 but users2 and user6 the BER are bad i need to decrees BER for use2and use6
![Profile Photo](https://optiwave.com/wp-content/uploads/avatars/887/015dabd02b0f08c3da6eebde0f1faeba-bpfull.jpg)
HI Damian
what is type of code used in FE-OCDMA-3-UsersON
![Profile Photo](https://optiwave.com/wp-content/uploads/avatars/887/015dabd02b0f08c3da6eebde0f1faeba-bpfull.jpg)
HI Damian
could you pleas give attachment to make FE-OCDMA-3-Users for FE-5users
![Profile Photo](https://optiwave.com/wp-content/uploads/avatars/887/015dabd02b0f08c3da6eebde0f1faeba-bpfull.jpg)
Thanks Damian
could you pleas give attachment to make user 3 on and give good BER for 3 user in FE-OCDMA-3-Users.
![Profile Photo](https://optiwave.com/wp-content/uploads/avatars/887/015dabd02b0f08c3da6eebde0f1faeba-bpfull.jpg)
Thanks Damian
Could you please give attachment
![Profile Photo](https://optiwave.com/wp-content/uploads/avatars/887/015dabd02b0f08c3da6eebde0f1faeba-bpfull.jpg)
Thanks Damian
I try to make user 3 on in the examples FE-OCDMA-3Users but it remain off and the BER decrease could you pleas solve this problem
![Profile Photo](https://optiwave.com/wp-content/uploads/avatars/887/015dabd02b0f08c3da6eebde0f1faeba-bpfull.jpg)
Hi Damian ,
Thanks a lot for answer but I need to know how I put the codeword0nFBG in the layout simulation and how i can used anther type of coding like Modified Quadratic Congruence (MQC) codes.
![Profile Photo](https://optiwave.com/wp-content/uploads/avatars/887/015dabd02b0f08c3da6eebde0f1faeba-bpfull.jpg)
Hi Damian,
How I can put the code words in FBG for FE-OCDMA-7-Users
![Profile Photo](https://optiwave.com/wp-content/uploads/avatars/887/015dabd02b0f08c3da6eebde0f1faeba-bpfull.jpg)
Hi Damian,could you pleas give example 9uses
and how i can put the code in the FBG
![Profile Photo](https://optiwave.com/wp-content/uploads/avatars/887/015dabd02b0f08c3da6eebde0f1faeba-bpfull.jpg)
thanks Mr Damian but how is it done I need to know how is the system work