[adil fadhilParticipant]

Dear Mr.Mohamed

Find attached the block diagram that represents what i need to build. thank you.

Adil

Attachments:

1. optiwave-2.docx

[adil fadhilParticipant]

Dear Mr.Mohamed

I don’t know what is the problem because i didn’t find the file with your message.

Adil

[adil fadhilParticipant]

Hi Mr.Mohamed

Thank you for your response but i couldn’t find the attachment. Is it possible to resend it again?

thanks
Adil

[adil fadhilParticipant]

Dear Mr.Mohamed

Thank you for your response. i would like to ask about this command:
OutputPort1 = InputPort1;
still i have to use it when using for example electrical null component as an input to the matlab component? what are the changes i should make to the matlab code in this case?

Best Regards

Adil

[adil fadhilParticipant]

Dear Mr.Mohamed

Thank you for your response. Actually, i am in the beginning of the project. firstly, i would like to model a pulsed laser source which is capable to generate optical Gaussian pulses by Matlab i.e. similar in operation to the optical Gaussian source. I tried to do that but i forced some problems regarding to the input and output signals for Matlab component. In the beginning i applied an electrical signal from NRZ pulse generator to the modeled laser source as a trigger signal whereas the signal from the output port should be optical but i didn’t get result. what is your opinion?

thank you

Adil

[adil fadhilParticipant]

Dear Mr.Mohamed

I would like to build my own quantum cryptography system using the co-simulation between matlab and optiwave. the first part of this system is the weak coherent pulses laser source which consists from classical laser source (pulsed laser source), linear polarizer and band-bass filter. I am really need help for this task and i am very appreciate you if you help me. find attached this part of the system.thank you.

Adil

Attachments:

1. optiwave-1.docx

[adil fadhilParticipant]

Dear Mr.Mohamed

I would like to build my own quantum cryptography system using the co-simulation between matlab and optiwave. the first part of this system is the weak coherent pulses laser source which consists from classical laser source (pulsed laser source), linear polarizer and band-bass filter. I am really need help for this task and i am very appreciate you if you help me. thank you.

Adil

[adil fadhilParticipant]

Dear Mr.Mohamed

Thank you for your fast response. Actually, as a first step i would like to model a quantum transmitter module which consists from different parts as represented in the attached figure by co-simulation matlab with optiwave. As a result, the final project is to build a framework that can be used from end users.I will be happy to know your opinion.

Best Regards

Adil

Attachments:

1. optiwave.docx