- This topic has 9 replies, 3 voices, and was last updated 10 years, 1 month ago by M. E..
-
AuthorPosts
-
-
July 14, 2014 at 8:36 am #12359M. E.Participant
Hi every one,
I have a problem in Spectral Amplitude Coding (SAC) OCDMA , i want to plot BER vs. user optical power, i make sweep for each user from -60 dBm to -5 dBm and plot it, but the output result isn’t as i want .. i think that there is some thing wrong
can any one help me
regardes
mohamed -
July 18, 2014 at 9:04 am #12564Damian MarekParticipant
Hi,
Could you please attach your project file and a link to the article you are trying to reproduce?
Thanks
-
July 19, 2014 at 6:39 am #12583M. E.Participant
thank you very much for your help , the article that i want to produce in this paper figure 4
best wishes -
July 23, 2014 at 2:50 pm #12844Damian MarekParticipant
I am not an expert on SAC-OCDMA techniques, but if you are trying to reproduce that figure I believe you are going to need to change the project layout to reflect the different code scheme. In our system example that you attached we are using MQC code, whereas in your attached example they use FCC code.
-
July 23, 2014 at 6:33 pm #12851M. E.Participant
how can i change it , iam new user on this simulator ??
and i don’t think that is a problem-
July 24, 2014 at 10:35 am #12884Damian MarekParticipant
Hi,
FCC code, I believe will have overlapping spectral content because of the choice of weighting and code length. I found two papers that I think can help you out changing the fiber gratings.
1. http://www.copl.ulaval.ca/fileadmin/copl/documents/documents/Publications-PDF/Rusch/journ56.pdf
Gives a great overview of SAC-OCDMA
2. http://www.sciencedirect.com/science/article/pii/S1877705813001744
You will need access for this paper but it explained the coding of FCC.
If you want to make a 3 user system I think it will simply amount to removing 1 grating on the transceiver side and you will have to choose the the remaining grating’s parameters to coincide with FCC.
Regards
-
-
August 7, 2014 at 10:08 pm #13089Salwa MostafaParticipant
hi ek4m
can you help me in representing code in system , i have a problem obtaining results -
August 20, 2014 at 9:37 am #13372M. E.Participant
thank you very much prof. Damian, i will try at this problem again
-
August 20, 2014 at 9:38 am #13373M. E.Participant
Salwa you can inbox ek4m2005@yahoo.com
-
August 20, 2014 at 9:51 am #13375M. E.Participant
Salwa can you be specific
-
-
AuthorPosts
- You must be logged in to reply to this topic.