problem in sine generator - Optiwave

Free Evaluation

This topic has 1 reply, 2 voices, and was last updated 2 years, 8 months ago by lanalayaq.

Viewing 2 reply threads

Author

Posts
- March 30, 2022 at 11:22 am #79818
  
  lanalayaq
  Member
  
  Hi everyone
  I have used the Opti system program for designing 16 channel WDM. Also, at the transmitter after the bit is generated, the electrical pulse is multiplied with a sine generator, the frequency of the sine generator should be changed from 2 to 32 GHz how can I change the frequency of the sine generator from 2 to 32 GHz inside subsystem because the BER analyzer display incorrect result due to sine generator.
  
  can you help me, please
  with regards
- April 5, 2022 at 11:54 am #80635
  
  Ahmad Atieh
  Moderator
  
  Hello,
  you can sweep any parameter in the components using the Sweep Mode in the component properties popup window. Once you select the sweep mode you could select the number of steps and the step size as shown in the attached image.
  Regards,
  Ahmad
- April 5, 2022 at 11:54 am #83239
  
  Ahmad Atieh
  Moderator
  
  Hello,
  you can sweep any parameter in the components using the Sweep Mode in the component properties popup window. Once you select the sweep mode you could select the number of steps and the step size as shown in the attached image.
  Regards,
  Ahmad
Author

Posts

Viewing 2 reply threads

You must be logged in to reply to this topic.