Nakagami m fading - Optiwave

Free Evaluation

This topic has 1 reply, 2 voices, and was last updated 1 year, 9 months ago by Sawyer Ge.

Viewing 2 reply threads

Author

Posts
- February 4, 2023 at 5:03 am #79954
  
  AWANISH KUMAR
  Member
  
  how can we use Nakagami m fading channel model for my project optical wireless communication?
- March 13, 2023 at 4:14 pm #81193
  
  Ahmad Atieh
  Moderator
  
  Dear Awanish,
  the best option to model Nakagami fading channel in OptiSystem is to use the Matlab component where you need to identify the number of input and output ports and define the port signal type. This can be done in the component. then you could modify the Matlab code to allow proper communication with OptiSystem. There are many examples on using the Matlab component in OptiSystem Example library found at the following location C:UsersUSER NAMEDocumentsOptiSystem 20.0 SamplesSoftware interworkingMATLAB co-simulation.
  Regards,
  Ahmad
- March 13, 2023 at 4:14 pm #83797
  
  Ahmad Atieh
  Moderator
  
  Dear Awanish,
  the best option to model Nakagami fading channel in OptiSystem is to use the Matlab component where you need to identify the number of input and output ports and define the port signal type. This can be done in the component. then you could modify the Matlab code to allow proper communication with OptiSystem. There are many examples on using the Matlab component in OptiSystem Example library found at the following location C:UsersUSER NAMEDocumentsOptiSystem 20.0 SamplesSoftware interworkingMATLAB co-simulation.
  Regards,
  Ahmad
Author

Posts

Viewing 2 reply threads

You must be logged in to reply to this topic.