- This topic has 12 replies, 4 voices, and was last updated 8 years, 1 month ago by
aasif bashir dar.
-
AuthorPosts
-
-
March 1, 2016 at 12:35 pm #30751
aasif bashir dar
Participanthi all,
i need to optimize multiple parameter to obtain quality factor.the multiple parametrs are laser power, length of fiber, …. and others.
i want know what is proper procedure for it.
with regards
-
March 1, 2016 at 12:54 pm #30757
aasif bashir dar
Participanthi all,
before any one would reply, i want say that i know the procedure, bjut have confusion of how to set the the parameter so as to get the optimized results.responses will be appreciated and especially any basic .osd file.
with regards
-
March 3, 2016 at 6:14 pm #31303
alistu
ParticipantHi Aasif,
Since you have asked in your post about the proper procedure, but then you have mentioned in your commnet that you know about the procedure, I believe in order to be more specific about it, can you please mention your requirements and the .osd file in here if it is possible?
Regards
-
-
March 3, 2016 at 10:49 am #31251
FAYIQA NAQSHBANDI
SpectatorHi Aasif
I am posting a link below.It lists the steps you will need to follow in optiwave to optimise different parameters.
Regards
-
March 3, 2016 at 12:47 pm #31276
aasif bashir dar
Participanthi fayiqa,
thanks for the reply
the link you have posted above is single point optimization(SPO), i wants the details of multipoint optimization(MPO).
actually i am my self trying it on optisystem but i am not confident of what i am doing is correct procedure, and i am not able to optimize all parameterswith regards
-
March 3, 2016 at 6:44 pm #31307
alistu
ParticipantThank you for the clarification (even though it was clear inn topic question). Please refer to the page address below where a rather comprehensive explanation is available:
Lesson 7: Optical Amplifiers — Designing Optical Fiber Amplifiers and Fiber Lasers
Regards
-
-
March 4, 2016 at 12:14 am #31339
aasif bashir dar
Participanthi alistu,
thanks for your reply
the link provide by you also shows the optimization of single parameter.with regards
-
March 4, 2016 at 12:40 am #31352
aasif bashir dar
Participantit happen some time alistu,
thanks for replybut please i need to how to optimize multiple parameters simultaneouly in optisystem
with regards
-
March 4, 2016 at 1:18 am #31371
aasif bashir dar
Participantyeah i will wait for it and try that ,upto then myself also
regards -
December 19, 2016 at 6:58 am #41843
jalil Aziz
ParticipantDear mr aasif bashir dar
please did you get the answer for the multiparameter optimization in optisystem 14, since I know the procedure but at the end of calculation the optimization will be cancelled. I think the problem is in the parameter and result column.
best regards
jalil
-
December 21, 2016 at 7:39 am #41865
aasif bashir dar
Participantwell jalil ;
thanks for your concern(i think you have personally messaged me , but i would like share my thoughts here)….
i have not technically used multipont optimization (with confidence) till now… so i cant help you
i would rather suggest to optimize the single quality at one time…
with regards
-
-
AuthorPosts
- You must be logged in to reply to this topic.