Latch

[AYAN DEY]

How to implement a latch circuit using Opti-FDTD software

[Scott Newman]

Ayan,

Latch circuits and SOA applications are a large field. You are going to need to be more specific on what you are trying to do and where you are having difficulties.

Scott

[Scott Newman]

Ayan,

Latch circuits and SOA applications are a large field. You are going to need to be more specific on what you are trying to do and where you are having difficulties.

Scott

[Victor Wexler]

How to create/design a layout in which a signal passes through SOA and then create a memory/store circuit using OPTI-FDTD software

[Victor Wexler]

How to create/design a layout in which a signal passes through SOA and then create a memory/store circuit using OPTI-FDTD software

[Victor Wexler]

How to design a layout of a SOA switch using OPTI-FDTD Software

[Victor Wexler]

How to design a layout of a SOA switch using OPTI-FDTD Software

[Victor Wexler]

SOA XGM Operations

[Victor Wexler]

SOA XGM Operations

[Scott Newman]

Ayan,

These are general design topics…We are here to provide support on how to use the product and will do so if you have specific questions about the products.

For photonic crystal design We have a number of webinars available through the support drop down which will be of use to you.

Gain materials are supported through either Lorentz-Drude models or a positive imaginary component to the refractive index. One note on gain materials is saturation is not within the model so caution must be used as the simulation could easily become unstable in this domain.

Scott

[Scott Newman]

Ayan,

These are general design topics…We are here to provide support on how to use the product and will do so if you have specific questions about the products.

For photonic crystal design We have a number of webinars available through the support drop down which will be of use to you.

Gain materials are supported through either Lorentz-Drude models or a positive imaginary component to the refractive index. One note on gain materials is saturation is not within the model so caution must be used as the simulation could easily become unstable in this domain.

Scott

[Victor Wexler]

Thanks

[Victor Wexler]

Thanks

[Victor Wexler]

How to implement inject current value of a material core cladding layer?

[Victor Wexler]

How to implement inject current value of a material core cladding layer?

[Scott Newman]

Ayan,

I am unsure what you are asking about. Are you asking about modelling electro-optic effects within the core and cladding layers?

Scott

[Scott Newman]

Ayan,

I am unsure what you are asking about. Are you asking about modelling electro-optic effects within the core and cladding layers?

Scott

[Victor Wexler]

Yes

[Victor Wexler]

Yes

[Author]

Posts