- This topic has 13 replies, 9 voices, and was last updated 8 years, 3 months ago by
SAHIL SINGH.
-
AuthorPosts
-
-
January 1, 1970 at 12:00 am #84003
Kattie Bartley
Member(Awaiting moderation)
-
January 1, 1970 at 12:00 am #84005
Kattie Bartley
Member(Awaiting moderation)
-
March 29, 2016 at 9:14 am #34015
Viktor Usov
ParticipantHello.
Faced with a problem that often occurs in optical systems users. Recently I upgraded the RAM on your laptop (8 GB). And still pursues this problem. Installed 14 version of the program. Who can help with this issue? -
March 29, 2016 at 10:00 am #34140
Damian Marek
ParticipantAttach your project file, it could be that the simulation is not set up correctly.
-
March 29, 2016 at 12:52 pm #34153
Dr. Dhiman Kakati
ParticipantHello Viktor Usov,
What error your are facing. Please elaborate. For running Optisystem there is not much need of RAM. Even you can run Optisystem 14 on 2 GB computer. If your system has 8 GB RAM, This is more than Sufficient. I think your error is not with the RAM as I also upgraded recently RAM to 8 GB. Need more explanation from your side if possible screenshot to resolve the issue. Thanking you.Regards,
Dhiman -
March 31, 2016 at 2:47 pm #34280
SAHIL SINGH
ParticipantHello Viktor Usov,
Could you please specify the error which you are facing …. For running Optisystem there is not much need of RAM.AS rightly mentioned by Dhiman kakati you can even run Optisystem 14 on 2 GB computer…
Regards
Sahil Singh
-
April 3, 2016 at 3:28 am #34727
aasif bashir dar
Participanthi viktor usov,
i have simulated the .osd files even on the 2 RAM using the optisytem 13 and 14 both… my also ugraded my RAM to 4GB, now my simulation is reduced a bit.
with regards
-
April 3, 2016 at 3:51 am #34740
SAHIL SINGH
ParticipantHi Aasif Bashir,
Ya that is what i had mentioned in my previous comment… Optisystem works fine with 2GB ram… But of course if the Ram is larger your simulation time will no doubt be reduced…
Regards
Sahil Singh -
April 5, 2016 at 9:03 am #35644
Naazira Badar
ParticipantYes, even I am not clear what exactly is the error. Is it that after upgrading your RAM to 8Gb , your optisystem software is not running?
In that case, you should try re-installing ; or contact optisystem support.Best Wishes
Naazira Badar. -
April 5, 2016 at 9:21 am #35646
Dr. Dhiman Kakati
ParticipantTry to re-download the setup file from optiwave site and the try to install, I think the problem is with your Operating system.
Regards,
Dhiman -
April 5, 2016 at 9:45 am #35649
SAHIL SINGH
ParticipantHi Viktor Usov,
Please let us know if your query is resolved or not.. If not do try to re-downloaded the setup file from the optiwave site as suggested by Dhiman kakati..
Regards
SAHIL Singh -
April 5, 2016 at 10:48 am #35663
burhan num mina llah
ParticipantHi All
i think we should wait for Viktor Usov to upload the .osd file or atleast tell us what problems he is facing and then give the respective advice..
Regards
Burhan
-
April 5, 2016 at 3:48 pm #35754
Ranjeet Kumar
ParticipantHi,
I also agree that the size of RAM doesn’t create problems in simulation in case of optisystem.
Optisystem software is not so bulky one.
I think you have some problem in your design.
Seeking your response. -
April 5, 2016 at 3:57 pm #35756
SAHIL SINGH
ParticipantHi Ranjeet,
I agree that the size of RAM is not at all an issue in simulation in optisystem. I also think there might be some problem in the design… But lets wait for the response..
Regards
Sahil Singh -
April 5, 2016 at 5:07 pm #35768
Ankita Sharma
ParticipantHi Sahil Singh,
I have seen optisystem run on laptops which have Ram as low as 1GB and it worked fine.. So I also rule out this possibility that it may be the cause of an error…
Thanks and Regards
Ankita Sharma -
April 5, 2016 at 5:17 pm #35770
SAHIL SINGH
ParticipantHi Ankita Sharma,
Well i completely agree with your point that optisystem runs on laptops which have lesser RAM so it should not be an issue at all..
Regards
Sahil Singh
-
-
AuthorPosts
- You must be logged in to reply to this topic.