AMI WDM - Optiwave

Free Evaluation

This topic has 1 reply, 2 voices, and was last updated 5 years, 6 months ago by Ahmad Atieh.

Viewing 1 reply thread

Author

Posts
- April 26, 2019 at 10:17 am #51205
  
  Shivam Wadhwa
  Participant
  
  HI, I want to analyze the effect of different line coding technique on WDM . For that I use the AMI line coding technique but I am not getting the output with the circuit I have made .I request u to kindly help me to rectify this issue.
  
  The Optisystem file is attached with this mail for your reference.
- April 30, 2019 at 8:36 am #51234
  
  Ahmad Atieh
  Moderator
  
  Hello Shivam,
  As I’ve explained to you in separate email. Due to the using of AMI coding, the signal bandwidth increased (almost doubled), which affected the signal quality after passing through 10GHz MUX/DEMUX. Thus the MUX/DEMUX filters bandwidth needs to be increased (40-50GHz). As a result of that effect, the 100GHz channels spacing caused also the signal quality to suffers from neighboring channel due to interference. Much better performance can be achieved if you use 200GHz channel spacing.
  Regards,
  Ahmad
Author

Posts

Viewing 1 reply thread

You must be logged in to reply to this topic.