Logo-optiwave
Search
Close this search box.
Free Evaluation

single-mode and multimode polymer waveguides

Home › Forums › BPM › single-mode and multimode polymer waveguides

Viewing 2 reply threads
  • Author
    Posts
    • June 30, 2020 at 1:53 pm #67422
      Md Omar Faruk Rasel
      Participant

      Hello,

      I am a beginner to simulate polymer waveguides using OPtiBPM and optiFDTD. In the case of designing the waveguide in the Layout, I have concern the following issues:
      1. how to define the core diameter of the waveguide (for example, I want to design the core diameter like 8 um 0r 40 um)?
      2. is it possible to differentiate the step-index (SI) and graded-index (GI) profiles?
      3. How to calculate the propagation loss as well as crosstalk analysis ( in case of bending waveguides)

      If possible, please provide me the advice on the above-mentioned issue. Thank you very much for your kind cooperation.

      Best regards,
      Rasel

    • June 30, 2020 at 2:02 pm #67498
      Scott Newman
      Moderator

      Rasel,

      1. You specify you are looking at waveguides and refer to core diameter so I will assume you are discussing fibers. In this case you need to setup a fiber profile. You will want to create your layers in the 3D profile definition. There is a WG_Fiber_Example already there with a Core of 2.0 um radius.
      2. OptiFDTD does not currently support graded-index profiles so I will assume you are referring to OptiBPM. In OptiBPM the graded-index profiles are diffuse waveguides and these are a different type of profile so are differentiated. We currently support Ti:LiNb03 and Mg:LiNb03, create one of these profiles and set the appropriate parameters.
      3. Under the “Simulation” entry in the menu bar you will see “Additional Output Data” here you can configure to monitor the Power in the Output Waveguides. Additionally in the toolbar you will see an option for “Monitor Paths”, the icon looks like a pen drawing a red line. You can setup your path to be your waveguides and montior power along them.
    • July 2, 2020 at 9:23 am #67515
      Md Omar Faruk Rasel
      Participant

      Dear Mr. Scott Newman,

      Thank you very much for your advice. I am trying to do it according to your advice.

  • Author
    Posts
Viewing 2 reply threads
  • You must be logged in to reply to this topic.

Contact us

1-866-576-6784

1-613-224-4700

info@optiwave.com

Learning

Community

Resources

© 2023 Optiwave Systems Inc.