FTTH PLANNING

I think there are some samples about it in folder name” samples”…..look for it and benefit of it.
Regards.

Hello Umer
I want to mention that a broadband access network offers various high-speed services to the end-user such as internet, multimedia, tele-medicine and distant learning. Fiber to the home (FTTH) is an optical access network architecture that uses optical fibers to replace all or part of the metallic cables to the end-user. Using OptiSystem we can explore the performance of different architectures for FTTH networks.
I am posting a link of video where it is explained that an optical code-division multiple access (OCDMA) structure using three users.

Check the video link.

Hope it will help.
Thanks
Regards

I also want to add the benefits of FTTH which are:
Multi-parameter scanning enables system designers to study trade-offs with respect to parameters of interest and to choose optimal designs for deployments.
Enables users to analyze different algorithms for electronic equalization.
New BER Test Set enables simulation of milions of bits for direct error counting.
FEC
Interfaces with popular design tools.
Significantly reduces product development costs and boosts productivity through a comprehensive design environment to help plan, test, and simulate optical links in the transmission layer of modern optical networks.

Hope this information will be very helpful to you.
Regards

The simulation design for the layout shown in the video consists of 3-user fiber bragg grating (FBG) based OCDMA network at 200 Mbit/s. Uniform FBGs are used to impelement the Modified Quadratic Congruence (MQC) codes by spectral amplitude encoding. The signal is generated using an incoherent source modulated with NRZ PRBS data using a Mach-Zehnder Modulator. The optical link is 10 km of single mode fiber. The receiver is comprised of two spectral filters and two photodetectors connected in a balanced configuration which perform the decoding with a low-pass filter and a BER analyzer. In this experiment User 1 and 2 are ON and User 3 is OFF.

I hope this is helpful to you.

Regards

Hello Umer,
There are some samples in the optisystem 14 sample folder as mentioned by Mohammad. You may like to have a look into those examples.
Also if your are talking about the implementation than the video link provided by Karan should help you.
What exactly you want to implement?

Regards

Hello Umer,

As far as i know there is a scope of doing so. What exactly you wish to implement. It will be beneficial if you try to open up on this topic.
Thanking you

Regards

Burhan