Home › Forums › SYSTEM › Why Modulated signal after EAM do not start from level 0 › Reply To: Why Modulated signal after EAM do not start from level 0
![Profile Photo](https://optiwave.com/wp-content/uploads/avatars/570/f5a4d5f01c0ac61f82e9df3c934b3005-bpfull.jpg)
thanks Alot Jaffar !
i have made many calculations my minimizing laser power but response is still similar i.e. the modulated signal never started from zero.
Only thing that happens by minimizing laser power is that the modulated signal start him self from lower values in same proportion as i am minimizing laser power.
I am attaching some the graphs of modulated signal at different laser powers
fig A with laser power = -100 dBm
fig B with laser power = -20 dBm
fig C with laser power = 0 dBm
fig D with laser power = 10 dBm
Basically i want modulated signal to start from level zero without changing laser power (because minimizing my laser power will degrade my system performance very badly) .
So there is any way to get modulated signal from level zero is by using any procedure/technique on EAM. So any one know any technique on EAM to get required signal kindly share.
OR
if any one has any clue regarding this problem kindly share.
Best Regards
Categories
- All
-
Knowledge
Contains a detailed Q&A knowledge base. -
General
All non-technical questions. -
System
Optical system design and analysis. -
Instrument
Communicate and control different kinds of instruments. -
SPICE
Opto-electronic circuit design. -
FDTD
Finite-Difference Time-Domain simulation. -
BPM
Beam Propagation Method analysis and design. -
Grating
Fiber optic grating simulation. -
Fiber
Optical fiber design and characterization. -
Exchange
Users can exchange design files.
(Matlab, C++, etc.)