Time Window - Optiwave

Free Evaluation

This topic has 1 reply, 2 voices, and was last updated 10 years, 3 months ago by Damian Marek.

Viewing 1 reply thread

Author

Posts
- August 27, 2014 at 12:02 pm #13471
  
  Abdallah Ismail
  Participant
  
  Dear,
  I need to understand the exact meaning of the Time window of the simulation in optisystem layout global parameters and how it works in the simulation.
  and what is the meaning that “each component works with the same Time window”.
  Also if i have a multimode fiber with modal delay or relative delay is greater than the time window,how this will affect my design.
  
  Best regards,
  Abdallah
- August 27, 2014 at 4:00 pm #13473
  
  Damian Marek
  Participant
  
  Hi Abdallah,
  
  The time window is the time domain used in the simulation, in other words sampled signals only have time data in a certain range (0, Time Window). Time domain visualizers, as an example, use the time window to correctly display the results, this is why it is a global parameter, so that all visualizers display the same time window.
  
  Time domain signals that are delayed out of the time window are shifted back into the beginning of the time domain. It will not affect your design.
  
  Hope this helps!
Author

Posts

Viewing 1 reply thread

You must be logged in to reply to this topic.