- This topic has 9 replies, 2 voices, and was last updated 10 years, 4 months ago by
Damian Marek.
-
AuthorPosts
-
-
July 4, 2014 at 9:54 am #12242
Pablo Escalante
ParticipantHello everyone:
I’m currently validating experimental results that I got from an erbium doped fiber amplifier manufactured by the OptoSci company. This amplifier uses a MetroGain M5 fiber of 12 m and I have the absorption and emission coefficients. The problem is that when I performing a OptiSystem simulation I get big differences. The only significant change I’ve made in my project is to add the Cross-section file.
Am I doing something wrong?
I send you a graph of my results, a picture of my project and format of the Cross-section file.
Best regards,
Pablo -
July 4, 2014 at 9:58 am #12247
Damian Marek
ParticipantHi Pablo,
Thanks for posting! Could you try re-attaching your project file and cross section file please?
Regards
-
July 4, 2014 at 11:32 am #12248Participant
Thanks Damian, I send you my project and Cross-section file.
Regards
-
July 4, 2014 at 1:59 pm #12255Participant
Hi Pablo,
The gain and absorption graphs are looking correct, it just seems like a much lower power ASE. Have you verified that the Core radius, Er doping radius etc are all correct?
I think the difference may simply come from the different resolution bandwidths used. In your experiment on your optical spectrum analyzer what resolution bandwidth did you use? And did you use the default setting for OptiSystem?
If you are not sure what resolution bandwidth means there is another forum post on the topic at:
Let me know if this helps!
-
-
July 4, 2014 at 11:00 pm #12260Participant
Thank you very much Damian!
I modified the resolution bandwidth and i improved my results. The core radius, Er doping radius, Er ion density and Er metastable lifetime are the default values. I sent an email to the manufacturer requesting such values. If you have some of these values or saturation parameter would be a great help for me.
Regards
-
July 7, 2014 at 10:34 am #12275Participant
Hi Pablo,
Glad I could help, unfortunately we don’t have the data for these types of fibers. I was looking at the specs the vendor gives and they seem similar to the default options in OptiSystem. I think your best bet is to wait for a response from them as some of the parameters were slightly different metrics. Let me know when you get a response and I can help you fit them to our model.
Regards
-
July 21, 2014 at 9:42 pm #12684Participant
Hello again Damian,
I have the MetroGain M5 fiber parameters (Core radius, Er doping radius, Er ion density and Numerical aperture) and I improved my results even more (attached image). I know that in my experiments there is loss in the connectors but I wonder if there is some parameter that I’m not counting on my simulation to help me adjust my results.
Regards
-
July 23, 2014 at 9:19 am #12774Participant
Good to hear from you,
Could you attach your project again with the updated settings? It’s looking much closer now. And what was the resolution bandwidth that you used for your experimental results? I would like to reproduce these results exactly!
Thanks
-
-
July 24, 2014 at 8:54 pm #12897Participant
Thanks for your help Damian
I send you the project with the updated parameters. In my experimental results I used a resolution bandwidth of 1 nm (RBW in p_18OSA.jpg).
Regards
-
July 25, 2014 at 3:28 pm #12941Participant
I will be travelling for the next couple weeks, but I’ll see if I can find any problems!
-
-
-
AuthorPosts
- You must be logged in to reply to this topic.