- This topic is empty.
-
AuthorPosts
-
-
April 1, 2014 at 2:59 pm #10089
Damian Marek
ParticipantQuestion:
I would like to simulate a commercial optical intensity modulator in OptiSystem. Which is the most suitable component to use and how does it function?
-
April 1, 2014 at 3:02 pm #10090
Damian Marek
ParticipantAnswer:
There are two simple options. The easy one would be using the Mach-Zehnder Modulator which you only need to define the Extinction ratio.
The second option is using the LiNb Mach-Zehnder Modulator which is a more detailed model. Using this model, you can define the Insertion loss, Extinction ratio, VÏ€ voltage, etc.
Since it is a dual driven device, the LiNb Mach-Zehnder Modulator can be setup to include settings for the bias voltages and the amplitudes of the modulation voltages at both arms, simply by checking the Normalize electrical signal box.
In the attached file, I have provided three examples using the LiNb Mach-Zehnder Modulator to modulate optical signals. Each example is set to a different bias voltage to achieve different pulse carving characteristics. Instead of using the internal options of the modulator, I have provided external circuitry and an external bias to drive the modulator in push-pull mode.
If the Absorption and Phase data is available, then it is easy to implement the Dual Port Dual Drive Mach-Zender Modulator Measured component.
Attachments:
-
May 6, 2018 at 2:40 am #48760
Suresh Sapkota
Participantunable to open this attachment. Please help me.
-
May 11, 2018 at 3:26 am #48788
Fabrice MFUAMBA
ParticipantThank You so much
-
March 16, 2020 at 12:22 pm #66414
Ninh Bui Trung
Participant(Awaiting moderation)
-
-
AuthorPosts
- You must be logged in to reply to this topic.