Hi Dhiman
Go to this content of featured discussion
There are two simple options. The easy one would be using the Mach-Zehnder Modulator which you only need to define the Extinction ratio.
The second option is using the LiNb Mach-Zehnder Modulator which is a more detailed model. Using this model, you can define the Insertion loss, Extinction ratio, VÏ€ voltage, etc.
Since it is a dual driven device, the LiNb Mach-Zehnder Modulator can be setup to include settings for the bias voltages and the amplitudes of the modulation voltages at both arms, simply by checking the Normalize electrical signal box.
In the attached file, I have provided three examples using the LiNb Mach-Zehnder Modulator to modulate optical signals. Each example is set to a different bias voltage to achieve different pulse carving characteristics. Instead of using the internal options of the modulator, I have provided external circuitry and an external bias to drive the modulator in push-pull mode.
If the Absorption and Phase data is available, then it is easy to implement the Dual Port Dual Drive Mach-Zender Modulator Measured component.
For system file go to this link and download it
MZM Operation and Pulse Carving [Optical System]
.
