The following is a list of scientific papers, technical journals, periodicals, and conference publications which reference the use of OptiBPM. These references were collected from internal sources, customer submitted papers, and scientific articles via Google Scholar – and to the best of our knowledge, make use of our OptiBPM software package. If you locate any mistakes, please notify us immediately by contacting info@optiwave.com.
[1]
P. Maurya, N. Singh, and N. Mandal, “A novel technique on MZI based electro-optic type pressure transmitter using modified bourdon tube,” Optik, vol. 144, pp. 573–585, 2017.
[2]
A. Adami, S. M. Hamidi, K. Navi, and M. Hosseinzade, “All optical fan out able half adder circuit based on nonlinear directional coupler,” Optik, vol. 141, pp. 114–123, 2017.
[3]
T. Matsumuro, Y. Ishikawa, T. Mitani, N. Shinohara, M. Matsunaga, and M. Yanagase, “Basic study of beam pilot signal for terrestrial microwave power transmission,” 2017 IEEE International Conference on Computational Electromagnetics, ICCEM 2017, pp. 213–214, 2017.
[4]
A. Pal, S. Kumar, and S. Sharma, “Binary to Octal and Octal to Binary Code Converter Using Mach-Zehnder Interferometer for High Speed Communication,” Journal of Optical Communications, vol. 38, no. 2, pp. 117–127, 2017.
[5]
H. Wang, X. Li, M. Zhang, and K. Chen, “Broadband 2× 2 lithium niobate electro-optic switch based on a Mach–Zehnder interferometer with counter-tapered directional couplers,” Applied optics, 2017.
[6]
S. S. MD SALLAH, S. H. MD ALI, P. S. MENON, N. JUHARI, and M. S. ISLAM, “Comparative Performances of SOI-Based Optical Interconnect vs. Electrical Interconnect in Analog Electronic Applications,” IEICE Transactions on Electronics, vol. E100.C, no. 7, pp. 655–661, 2017.
[7]
C. Burtscher, D. Seyringer, and …, “Comparision of splitting properties of various 1×16 splitters,” Advances in Electrical and Electronic Engineering, 2017.
[8]
D. Chack, V. Kumar, S. K. Raghuwanshi, and D. P. Singh, “Design and analysis of O–S–C triple band wavelength division demultiplexer using cascaded MMI couplers,” Optics Communications, vol. 382, pp. 324–331, 2017.
[9]
D. K. Choge, H.-X. Chen, B.-L. Tian, Y.-B. Xu, G.-W. Li, and W.-G. Liang, “Design and fabrication of lithium niobate based single mode Y-branch APE waveguide,” Proceedings of SPIE – The International Society for Optical Engineering, vol. 10457, 2017.
[10]
N. Mandal, A. Lata, J. K. Roy, and …, “Design and implementation of a real time PC based flow indicating controller and optical transmitter,” 2017 Eleventh International Conference on Sensing Technology (ICST), 2017.
[11]
R. W. Purnamaningsih, N. R. Poespawati, and …, “Design of a four-branch optical power splitter using III-nitride semiconductors,” Proceedings of the 2017 International Conference on Telecommunications and Communication Engineering, 2017.
[12]
K. Choudhary and S. Kumar, “Design of pseudorandom binary sequence generator using lithium-niobate-based Mach–Zehnder interferometers,” Optical Engineering, vol. 56, no. 5, p. 057104, 2017.
[13]
J. J. D. Leon, Design, Fabrication and Characterization of Thin Film Structures Through Oxidation Kinetics. escholarship.org, 2017.
[14]
C. Jörg, F. Letscher, M. Fleischhauer, and G. V. Freymann, “Dynamic defects in photonic Floquet topological insulators,” New Journal of Physics, vol. 19, no. 8, 2017.
[15]
Y. Sun et al., “High sensitivity optical fiber strain sensor using twisted multimode fiber based on SMS structure,” Optics Communications, vol. 405, pp. 416–420, 2017.
[16]
S. S. B. M. Sallah, S. H. M. Ali, P. S. Menon, N. Juhari, and M. S. Islam, “Implementation of on-chip optical interconnect in high speed digital circuit: Two-stage CMOS buffer,” Asian Journal of Scientific Research, vol. 10, no. 1, pp. 50–55, 2017.
[17]
S. S. B. Md Sallah, S. H. Md Ali, P. S. Menon, N. B. Juhari, and M. S. Islam, “Implementation of SOI-based Rib waveguide for high-speed optical interconnect,” Journal of Telecommunication, Electronic and Computer Engineering, vol. 9, no. 2, 2017.
[18]
T. Morgado et al., “InP MMI based polarization splitter for Photonic Integrated Circuits,” International Conference on Transparent Optical Networks, 2017.
[19]
N. Zamhari and A. A. Ehsan, “Large cross-section rib silicon-on-insulator (SOI) S-bend waveguide,” International Journal for Light and Electron Optics, 2017.
[20]
M. Hadjloum, M. El Gibari, H. Li, and A. S. Daryoush, “Leaky waveguide deflector for 40 GS/s and 6 bits all-optical analog-to-digital converters,” Journal of the Franklin Institute, vol. 354, no. 18, pp. 8710–8720, 2017.
[21]
C. Burtscher, D. Seyringer, A. Kuzma, and M. Lucki, “Modeling and optimization of 1× 32 Y-branch splitter for optical transmission systems,” Optical and Quantum Electronics, 2017.
[22]
C. Burtscher, D. Seyringer, M. Lucki, and …, “New waveguide shape for low loss and high uniformity y-branch optical splitter,” Proc. SPIE 10106, Integrated Optics: Devices, Materials, and Technologies XXI, 2017.
[23]
S. Yeoh, K. N. Mutter, and M. Z. M. Jafri, “Numerical analysis of nonlinear multimode interference waveguide as a refractive index sensor,” Proceedings Volume 10329, Optical Measurement Systems for Industrial Inspection X, 2017.
[24]
R. Agalliu, Optimization of optical transmission systems. dspace.cvut.cz, 2017.
[25]
N. Mat Nashim, M. A. M. Al-Tarawni, A. M. Aziz, S. Abdullah, and A. A. A. Bakar, “Optimizing low half-wave voltage electro-optic polymer modulator for optical waveguide sensor,” Optik, vol. 134, pp. 9–20, 2017.
[26]
A. R. N. Bastos, A. Shahpari, L. D. Carlos, M. Lima, P. S. Andre, and R. A. S. Ferreira, “Performance assessment of a QPSK coherent demodulator based on organic-inorganic hybrids,” International Conference on Transparent Optical Networks, 2017.
[27]
N. S. Hidayah et al., “Performance of different Mach-Zehnder interferometer (MZI) structures for optical modulator,” Journal of Telecommunication, Electronic and Computer Engineering, vol. 9, no. 2–8, pp. 25–29, 2017.
[28]
L. Sainawi and K. Ismail, “Receiver Performance Improvement in Radio over Fiber Network Transmission,” Optical Fiber and Wireless Communications, 2017.
[29]
N. Zamhari, A. A. Ehsan, and M. S. A. Rahman, “S-bend silicon-on-insulator (SOI) large cross-section rib waveguide for directional coupler,” International Journal of Electrical and Computer Engineering, vol. 7, no. 6, pp. 3299–3305, 2017.
[30]
K. Receveur, K. Wei, M. Hadjloum, M. E. Gibari, and A. D. Rossi, “Sensitivity improvement of broadband electro-optic polymer-based optical phase modulator using 1D and 2D photonic crystal structures,” Chinese Optics Letters, vol. 15, no. 1, pp. 2–6, 2017.
[31]
A. V. Joža et al., “Simultaneous characterization of bidirectional coupler and semiconductor photodetectors spectral properties,” 2017 25th Telecommunications Forum, ℡FOR 2017 – Proceedings, vol. 2017-Janua, pp. 1–4, 2017.
[32]
W. P. Transfer and T. Matsumuro, “Study of a single-frequency retrodirective system with a beam pilot signal using dual-mode dielectric resonator antenna elements,” Wireless Power Transfer, pp. 1–14, 2017.
[33]
R. W. Purnamaningsih, N. R. Poespawati, T. Abuzairi, S. Rahardjo, M. Hamidah, and E. Dogheche, “The effect of waveguide parameters on gan based S-bend Y-junction optical power divider,” QiR 2017 – 2017 15th International Conference on Quality in Research (QiR): International Symposium on Electrical and Computer Engineering, vol. 2017-Decem, pp. 353–356, 2017.