Step Action
1 From the Simulation menu, select 2D 32bit Simulation Parameters.

Simulation parameters dialog box appears

2 Select TE as the 2D simulation type
3 Turn off the auto check for Mesh Delta. Type the following values for the mesh size:

Mesh Delta X (um): 0.01

Mesh Delta Z (um): 0.01

4 To set up the boundary condition parameters, click Advanced. The Boundary Conditions dialog box appears. Type the following values for the boundary condition:

•     Anisotropic PML layer number: 10

•     Theoretical Reflection Coefficient: 1.0e-12

•     Real Anisotropic PML Tensor Parameter: 10.

•     Power of grading Polynomial: 3.5

5 Run for 800 time steps