OptiGrating Publication References – 2012 and earlier

Compatibility:

Listing of scientific papers, technical journals, periodicals, and conference publications which reference the use of OptiGrating.

[1] J. Palaniappan, “A novel optical method for measuring disbond growth in bonded composite joints,” pp. 04 – 07, 2006.

[2] Y. Han and C. Cheng, “An optimized distributed fiber Bragg grating sensing system based on optical frequency domain reflectometry,” Frontiers of Optoelectronics, vol. 5, no. 3, pp. 345–350, 2012.

[3] S. Pal and B. R. Singh, “Analysis and design of corrugated long-period gratings in silica-on-silicon planar waveguides,” Journal of lightwave technology, vol. 25, no. 8, pp. 2260–2267, 2007.

[4] A. Tripathi, A. Shrimali, and B. B. Padhy, “Analysis of fiber Bragg grating array based multipoint sensor for monotonic temperature fields,” in Physics and Technology of Sensors (ISPTS), 2012 1st International Symposium on, 2012, pp. 39–42.

[5] R. Moritomo, T. Nakamura, Y. Kotani, and S. Oshiba, “Analysis of phase shift tolerance in a coherent OCDM system using FBG phase en/decoders,” IEICE transactions on communications, vol. 91, no. 8, pp. 2509–2515, 2008.

[6] L.-Y. Shao, J. P. Coyle, S. T. Barry, and J. Albert, “Anomalous permittivity and plasmon resonances of copper nanoparticle conformal coatings on optical fibers,” Optical Materials Express, vol. 1, no. 2, pp. 128–137, 2011.

[7] S. Garidel, J.-P. Vilcot, and D. Decoster, “Apodized filters on InP-material ridge waveguides using sampled Bragg gratings,” in Integrated Optoelectronic Devices 2005, 2005, pp. 121–130.

[8] S. Aubin, “Capteurs de position innovants: application aux Systèmes de Transport Intelligents dans le cadre d’un observatoire de trajectoires de véhicules,” Institut National Polytechnique de Toulouse-INPT, 2009.

[9] J. Palaniappan, H. Wang, S. L. Ogin, A. M. Thorne, G. T. Reed, A. D. Crocombe, Y. Rech, and S. C. Tjin, “Changes in the reflected spectra of embedded chirped fibre Bragg gratings used to monitor disbonding in bonded composite joints,” Composites Science and Technology, vol. 67, no. 13, pp. 2847–2853, 2007.

[10] D. H. Richards, “Commercial optical communication software simulation tools,” in WDM Systems and Networks, Springer, 2012, pp. 189–232.

[11] M. Smietana, W. J. Bock, and P. Mikulic, “Comparative study of long-period gratings written in a boron co-doped fiber by an electric arc and UV irradiation,” Measurement Science and Technology, vol. 21, no. 2, p. 025309, 2010.

[12] J. Jiang, C. L. Callender, and C. J. Ledderhof, “Corrugation-Induced SiO Planar Long-Period Gratings for Photonic Applications,” Photonics Technology Letters, IEEE, vol. 22, no. 13, pp. 951–953, 2010.

[13] S. Wakabayashi, A. Baba, A. Itou, and J. Adachi, “Design and fabrication of an apodization profile in linearly chirped fiber Bragg gratings for wideband> 35 nm and compact tunable dispersion compensator,” JOSA B, vol. 25, no. 2, pp. 210–217, 2008.

[14] R. Rebigan, M. Kusko, A. Avram, and F. Craciunoiu, “Design and Proposed Technological Flow of an Y-Splitter Waveguide Grating Sensor,” inSemiconductor Conference, 2007. CAS 2007. International, 2007, vol. 1, pp. 211–214.

[15] M. Ferchichi, M. Najjar, and H. Rezig, “Design of temperature-strain tunable UDWDM, DWDM, WDM FBG filter for Passive Optical Network Access,” in Mediterranean Winter, 2008. ICTON-MW 2008. 2nd ICTON, 2008, pp. 1–5.

[16] N. P. Ghimire, H. Bao, and M. Gu, “Design of zero dispersive double clad fiber for high efficiency operation of two color light,” Applied Physics B, vol. 108, no. 2, pp. 295–299, 2012.

[17] T. F. Capell, J. Palaniappan, S. L. Ogin, A. M. Thorne, G. T. Reed, A. D. Crocombe, S. C. Tjin, Y. Wang, and Y. Guo, “Detection of defects in as manufactured GFRP–GFRP and CFRP–CFRP composite bonded joints using chirped fibre Bragg grating sensors,” Plastics, Rubber and Composites, vol. 38, no. 2–4, pp. 138–145, 2009.

[18] T. F. Capell, S. L. Ogin, A. D. Crocombe, P. Peres, and D. Barnoncel, “Detection of disbonding in bonded joints with a spatially displaced CFBG sensor,” in ICCM International Conferences on Composite Materials, 2011.

[19] S. G. Raymond, P. Wagner, M. Panczyk, G. V. M. Williams, K. J. Stevens, I. Monfils, D. Hirst, J. Whaanga, Y. Kutuvantavida, M. D. H. Bhuiyan, and others, “Development of fibre Bragg grating based strain/temperature sensing system,” in SPIE OPTO, 2012, p. 82581L–82581L.

[20] C. Chen, L. Xiong, A. Jafari, and J. Albert, “Differential sensitivity characteristics of tilted fiber Bragg grating sensors,” in Optics East 2005, 2005, p. 60040B–60040B.

[21] J. Palaniappan, S. L. Ogin, A. M. Thorne, G. T. Reed, A. D. Crocombe, T. F. Capell, S. C. Tjin, and L. Mohanty, “Disbond growth detection in composite–composite single-lap joints using chirped FBG sensors,” Composites Science and Technology, vol. 68, no. 12, pp. 2410–2417, 2008.

[22] A. S. Karar, “Dynamics of a Passively Mode-locked Fiber Laser Containing a Long-period Fiber Grating,” Carleton University, 2007.

[23] C.-H. Lee, J. Lee, J. Park, and K. Taek Kim, “Easy fabrication of long-period fiber grating by winding a wire around an optical fiber fixed to cylindrical ROD,” Microwave and Optical Technology Letters, vol. 54, no. 8, pp. 1937–1941, 2012.

[24] D. Kinet, C. Caucheteur, M. Wuilpart, D. Garray, F. Narbonneau, and P. Mégret, “Effect of epoxy curing on tilted fiber Bragg gratings trasmission spectrum,” in Proceedings of the 18th International Conference on Composite Materials, 2011.

[25] F. Knappe, H. Renner, and E. Brinkmeyer, “Efficient design of spatially symmetric Bragg gratings for add/drop multiplexers,” AEU-International Journal of Electronics and Communications, vol. 62, no. 7, pp. 513–520, 2008.

[26] T. Mizunami, T. Fukuda, and A. Hayashi, “Fabrication and characterization of long-period-grating temperature sensors using Ge–B-co-doped photosensitive fibre and single-mode fibre,” Measurement Science and Technology, vol. 15, no. 8, p. 1467, 2004.

[27] T. Guo, L. Shang, Y. Ran, B.-O. Guan, and J. Albert, “Fiber-optic vector vibroscope,” Optics letters, vol. 37, no. 13, pp. 2703–2705, 2012.

[28] T. Mossberg and C. Greiner, “Fully Integrated, Multiport, Planar-Waveguide, Spectral Comparators and Multiplexers Based on Lithographic Holography,” DTIC Document, 2005.

[29] R. Liang, Q. Sun, J. Wo, and D. Liu, “High sensitivity temperature sensor based on Bragg grating in micro/nanofiber,” in CLEO: Applications and Technology, 2011, p. JThB133.

[30] M. Smietana, W. J. Bock, J. Chen, and P. Mikulic, “Highly sensitive pressure sensor based on long-period gratings written in a boron co-doped optical fiber,” Measurement Science and Technology, vol. 21, no. 9, p. 094026, 2010.

[31] C. Chen and J. Albert, “Hybrid modes analysis for cladding mode resonance peaks in tilted fiber Bragg gratings,” in Photonics North 2007, 2007, pp. 679623–679623.

[32] C. Wächter, “INTEGRATED OPTICS DESIGN: SOFTWARE TOOLS AND DIVERSIFIED APPLICATIONS,” in Frontiers in Planar Lightwave Circuit Technology, Springer, 2006, pp. 245–280.

[33] N. Minato, S. Kobayashi, K. Sasaki, and M. Kashima, “Inter-Band Crosstalk Reduction Using Sinc Apodization of Super-Structured Fiber Bragg Gratings for Hybrid WDM/OCDM Add/Drop Filters,” Photonics Technology Letters, IEEE, vol. 24, no. 6, pp. 446–448, 2012.

[34] A. Nand, “Intragrating sensing using chirped optical fibre Bragg gratings,” Victoria University, 2007.

[35] R. Sukanesh, R. K. Jeyachitra, P. Gautham, A. Raja, and S. Ajmera, “Investigation of the techniques deployed in spectrum slicing for microwave photonic filters,” in Computing, Communication and Networking, 2008. ICCCn 2008. International Conference on, 2008, pp. 1–6.

[36] R. Liang, Q. Sun, J. Wo, and D. Liu, “Investigation on micro/nanofiber Bragg grating for refractive index sensing,” Optics Communications, vol. 285, no. 6, pp. 1128–1133, 2012.

[37] A. Mokhtar, “Isolator-free DFB Laser for Analog CATV Applications,” Carleton University, 2007.

[38] S. Kobayashi, T. Suda, T. Ishiguro, T. Saitoh, and Y. Yamabayashi, “Laser oscillation with polysilane waveguide tunable external resonator,” in Optics East 2007, 2007, p. 67750H–67750H.

[39] A. Kapoor and E. K. Sharma, “Long period grating refractive-index sensor: optimal design for single wavelength interrogation,” Applied optics, vol. 48, no. 31, pp. G88–G94, 2009.

[40] T. Mizunami, Y. Sho, K. Yamamoto, and Y. Ishida, “Long-period fiber-gratings produced by exposure with a low-pressure mercury lamp and their sensing characteristics,” Optics Communications, vol. 282, no. 24, pp. 4699–4705, 2009.

[41] A. R. Sanderson, S. L. Ogin, A. D. Crocombe, M. R. L. Gower, R. J. Lee, S. C. Tjin, and B. Lin, “MONITORING CRACK GROWTH IN A DCB TEST USING A SURFACE-BONDED CHIRPED FBG SENSOR,” presented at the 18th INTERNATIONAL CONFERENCE ON COMPOSITE MATERIALS, 2011.

[42] L. M. Sá, C. Marques, N. Alberto, R. Nogueira, and P. André, “Multichannel dispersion compensation using a simplified approach SFBG design,” inInternational Conference on Applications of Optics and Photonics, 2011, pp. 800143–800143.

[43] A. Ivanov, “Multi-Parameter Fiber Optic Sensors for Structural Health Monitoring,” Carleton University, 2008.

[44] S. Zheng, Y. Zhu, and S. Krishnaswamy, “Nanofilm-coated long-period fiber grating humidity sensors for corrosion detection in structural health monitoring,” in SPIE Smart Structures and Materials+ Nondestructive Evaluation and Health Monitoring, 2011, p. 79831A–79831A.

[45] S. Kobayashi, M. Sawada, T. Suda, K. Ogura, and H. Tsushima, “Narrow tunable polysilane optical waveguide Bragg grating filters,” Photonics Technology Letters, IEEE, vol. 19, no. 6, pp. 363–365, 2007.

[46] C. Chen, Y. Y. Shevchenko, and J. Albert, “Novel sensing mechanisms using tilted fiber bragg gratings,” in Optical Waveguide Sensing and Imaging, Springer, 2008, pp. 25–49.

[47] M. Kusko, R. Rebigan, and D. Cristea, “Numerical Analysis of a Long Period Waveguide Grating Sensor,” in International Semiconductor Conference, 2006, 2006, vol. 1, pp. 155–158.

[48] Z. Chan, “OCDMA codec system based on long-period fiber grating,” Electronic Design Engineering, vol. 5, p. 061, 2011.

[49] R. L. Rito, S. L. Ogin, A. D. Crocombe, T. F. Capell, A. R. Sanderson, Y. Guo, S. C. Tjin, and B. Lin, “On the use of a CFBG sensor to monitor scarf repairs of composite panels,” Emerging Technologies in Non-Destructive Testing V, pp. 187–192, 2012.

[50] C.-F. Chan, C. Chen, A. Jafari, A. Laronche, D. J. Thomson, and J. Albert, “Optical fiber refractometer using narrowband cladding-mode resonance shifts,” Applied optics, vol. 46, no. 7, pp. 1142–1149, 2007.

[51] M. S. Ab-Rahman, A. A. Khairuddin, S. A. C. Aziz, N. H. A. Razak, and K. Jumari, “Optical Moderator Improves Flexibility Feature of Fiber-to-the Home Network,” Journal of Applied Sciences, vol. 11, no. 19, pp. 3372–3380, 2011.

[52] L. Sahu, B. B. Padhy, and S. M. Nalawade, “Optimization of Long Period Grating Parameters to Design a Mach-Zehnder Interferometer for WDM Applications,” in OPTICS: PHENOMENA, MATERIALS, DEVICES, AND CHARACTERIZATION: OPTICS 2011: International Conference on Light, 2011, vol. 1391, pp. 303–305.

[53] I. Fsaifes, M. Lourdiane, C. Lepers, R. Gabet, V. Beugin, and P. Gallion, “Performance of a 1Gbps Optical Direct Sequence CDMA Based on Sampled Fiber Bragg Grating.,” in Photonics North 2005, 2005, p. 59702C–59702C.

[54] M. R. Salehi, E. Abiri, M. Dezfouli, and K. Kazemi, “Performance of different code families in SAC-OCDMA systems impaired by GVD,” in GCC Conference and Exhibition (GCC), 2011 IEEE, 2011, pp. 613–616.

[55] S. Kobayashi, T. Suda, T. Ishiguro, D. Motoyoshi, and Y. Yamabayashi, “Polysilane optical waveguide devices using photo-bleaching effect,” in SPIE OPTO: Integrated Optoelectronic Devices, 2009, pp. 721907–721907.

[56] J. Palaniappan, H. Wang, S. L. Ogin, A. Thorne, G. T. Reed, S. C. Tjin, and L. N. McCartney, “Prediction of the reflected spectra from chirped fibre Bragg gratings embedded within cracked crossply laminates,” Measurement Science and Technology, vol. 17, no. 6, p. 1609, 2006.

[57] J. Palaniappan, S. L. Ogin, T. F. Capell, A. M. Thorne, G. T. Reed, S. C. Tjin, and L. Mohanty, “REFLECTED SPECTRA PREDICTIONS FOR CHIRPED FIBRE BRAGG GRATINGS USED FOR DISBOND DETECTION IN COMPOSITE/COMPOSITE JOINTS,” presented at the 16TH INTERNATIONAL CONFERENCE ON COMPOSITE MATERIALS, 2007.

[58] T. Mizunami, T. Tsukada, Y. Noi, and K. Horimoto, “Second-order nonlinearity and phase matching in thermally poled twin-hole fiber,” in Integrated Optoelectronic Devices 2004, 2004, pp. 115–122.

[59] C. Chen, “Sensing Characteristics of Core and Cladding Modes in Conventional Single Mode Fibre and Photonic Crystal Fibre,” Carleton University, 2008.

[60] C. F. Chan, G. A. Ferrier, D. J. Thomson, C. Chen, J. Albert, A. Vincelette, and P. Lefebvre, “Side-polished and tilted fiber Bragg grating sensors for structural health monitoring applications,” in The 14th International Symposium on: Smart Structures and Materials & Nondestructive Evaluation and Health Monitoring, 2007, p. 65300F–65300F.

[61] K. S. Khalid, M. Zafrullah, S. M. Bilal, and M. A. Mirza, “Simulation and analysis of Gaussian apodized fiber Bragg grating strain sensor,” Journal of Optical Technology, vol. 79, no. 10, pp. 667–673, 2012.

[62] Y. Shevchenko, N. U. Ahamad, G. Galway, A. Ianoul, and J. Albert, “Surface plasmon resonance fiber sensor for in situ monitoring of the deposition of nm-scale polymer films,” in 20th International Conference on Optical Fibre Sensors, 2009, pp. 750311–750311.

[63] Y. Shevchenko, “Surface Plasmon Resonance Sensor Based on the Tilted Fiber Bragg Grating,” Carleton University, 2007.

[64] S. L. Ogin, J. Palaniappan, T. F. Capell, A. M. Thorne, G. T. Reed, A. D. Crocombe, S. C. Tjin, and L. Mohanty, “The use of a CFBG fibre optical sensor to detect disbond development in composite/composite and metal/composite adhesively bonded joints,” presented at the Optical Fibres and Optoelectronics Measurement Conference, 2007, p. 4.

[65] J. Palaniappan, “The use of a CFBG sensor for detecting damage in composite laminates and adhesively bonded joints,” Ph. D. University of Surrey, 2008.

[66] S. L. Ogin, A. D. Crocombe, T. F. Capell, A. R. Sanderson, R. L. Rito, Y. Guo, S. C. Tjin, and B. Lin, “The use of chirped fibre Bragg grating sensors to monitor delaminationsincompositematerialsandstructures,” Emerging Technologies in Non-Destructive Testing V, pp. 163–168, 2012.

[67] T. F. Capell, S. L. Ogin, A. D. Crocombe, G. T. Reed, A. M. Thorne, J. Palaniappan, S. C. Tjin, and L. Mohanty, “THE USE OF THERMAL MISMATCH STRESSES TO DETECT DISBOND INITIATION AND PROPAGATION IN METAL/COMPOSITE BONDED JOINTS USING A CFBG FIBRE OPTICAL SENSOR,” presented at the 16TH INTERNATIONAL CONFERENCE ON COMPOSITE MATERIALS, 2007.

[68] R. Liang, Q. Sun, J. Wo, and D. Liu, “Theoretical investigation on refractive index sensor based on Bragg grating in micro/nanofiber,” in Photonics and Optoelectronics (SOPO), 2011 Symposium on, 2011, pp. 1–3.

[69] T. Guo, L. Shao, H.-Y. Tam, P. A. Krug, and J. Albert, “Tilted fiber grating accelerometer incorporating an abrupt biconical taper for cladding to core recoupling,” Optics express, vol. 17, no. 23, pp. 20651–20660, 2009.

[70] A. Jafari, “Tilted Fiber Grating Refractive Index Sensor and Interrogation Device,” Carleton University, 2006.

[71] A. R. Sanderson, S. L. Ogin, A. D. Crocombe, M. R. L. Gower, and R. J. Lee, “Use of a surface-mounted chirped fibre Bragg grating sensor to monitor delamination growth in a double-cantilever beam test,” Composites Science and Technology, vol. 72, no. 10, pp. 1121–1126, 2012.

[72] J. Jiang, C. L. Callender, C. J. Ledderhof, and J. Ding, “Wavelength tunable long period gratings based on silica waveguide geometric modulation,” inSPIE OPTO, 2011, p. 79340T–79340T.